You’ve got to get canbus compatible or error free LEDs. (Or find someone who knows how to readapt for LEDs from filament - no dice so far).
The LEDs don’t draw enough current so the car shuts them off for safety in case the bulb is broken open. You’ll see like a 2-4V monitoring voltage until you replace with a higher current filament bulb or an LED with a resistor (error free or canbus).
I just bought a 2010 Passat 2.0T wagon. It had/has a few electrical issues. One of the issues was the radio, the CD part of the radio wasn't working and that was causing an electrical draw. I bought a replacement radio from a scrap yard and installed it but it needs a code to work?
I am new to VW's and to this forum. I just bought a 2010 Passat Wagon 2.0T with 70k miles. CA car so no rust and in great shape, But...... the battery drains overnight. The owner told me about the problem so the car was priced accordingly.
With everything turned off, I attached a...
My 06 3.2L V6 needs a DSG service. I fear leaving it too long in case of future damage, and because I have no service history from the previous owner so I'm not sure if it has ever been done. It's at 132000km.
I'm sure many of you out there have done a DIY trans fluid and filter...