Volkswagen Passat Forum banner
1 - 15 of 15 Posts

· PassatWorld Elder
Joined
·
8,458 Posts
Discussion Starter · #1 ·
Anybody got any of the knobs that go on the Monsoon radio they want to part with?
Looking for 6 total but will take whatever is available.
 

· PassatWorld Elder
Joined
·
8,458 Posts
Discussion Starter · #2 ·
All you asshole scammers sending me private messages can just BLOW ME!
 

· PassatWorld Elder
Joined
·
8,458 Posts
Discussion Starter · #3 ·
  • Like
Reactions: VAGguy and PZ

· Moderator/Administrator
Joined
·
26,195 Posts
I'm sure I can snag a few from the local yard. No guarantees. I am working like mad to ready the house for sale and might not get out to do it.
 
  • Like
Reactions: AndreasPassat

· PassatWorld Elder
Joined
·
8,458 Posts
Discussion Starter · #6 ·
If you just happen to end up in a salvage yard, sure I'll bite on that.
Don't go out of your way on my account though.
I really wish I could do the same down here but B5 / B5.5 era Passat's are a rare animal down in these parts.
I think I've seen maybe about (8) B5's in the last 3 years I've been here. Lot's of newer Passat platforms though... but that's not helping me out.
 

· PassatWorld Elder
Joined
·
8,458 Posts
Discussion Starter · #9 ·
Well, wait a minute...
What is this parts car you speak of?
Year? Sedan or wagon? Manual or tip?
Maybe you have something I didn't know I needed... ;)
 

· PassatWorld Elder
Joined
·
28,082 Posts
Small knobs on the radio? My Monsoon only had the 2 medium knobs (IIRC). The Golf has multiple small knobs for bass, fader, balance, etc...
 

· PassatWorld Elder
Joined
·
28,082 Posts
I didn't have a double-din or a B5.5, so I never noticed them. My son's 01.5 B5.5 has a single din. My younger son's 05 Golf has a radio like that.
 

· Registered
2005 Passat Wagon, 1.8T, FWD
Joined
·
309 Posts
Word of advice for the unwary when removing the small knobs.

Often the little metal spacer that goes between the knob and the shaft will stay on the shaft when you pull the knob off.

The little metal spacer is needed in order for that knob to fit onto another shaft, so take some time and inspect that when you have pulled all the knobs off you haven't left any spacers behind.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top