Volkswagen Passat Forum banner

WP pulley and PS Pulley not flush...

783 views 1 reply 2 participants last post by  Tomvw 
#1 · (Edited)
I have changed the water pump on my AEB and upon getting everything back together I noticed the water pump pulley and the power steering pump pulley are not flush. The water pump pulley sits a little behind the power steering pump pulley and causes the belt to not sit right and rub against the power steering pump pulley. Everything is tight and using all correct parts. Any insight?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top