Volkswagen Passat Forum banner

Where to find exterior door trim?

1132 Views 11 Replies 7 Participants Last post by  Iowegian
So I need the belt trim (door trim? door molding? not sure what to call it) for my rear passenger door.

So far I'm having no luck with local salvage yards, or Google fu. Any suggestions? This is a wagon, will it make a difference?

If any of you have one of these laying around that will fit a 2003 let me know.

Attachments

See less See more
1 - 12 of 12 Posts
I bought door trim (plastic lower skirts) from ECS Tuning. Perhaps check with them. Or if all else fails, dealer. That's where I had to get the lower front bumper trim for my A4.
I bought door trim (plastic lower skirts) from ECS Tuning. Perhaps check with them. Or if all else fails, dealer. That's where I had to get the lower front bumper trim for my A4.
Maybe this?
https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/
I bought door trim (plastic lower skirts) from ECS Tuning. Perhaps check with them. Or if all else fails, dealer. That's where I had to get the lower front bumper trim for my A4.
Looks like they do have it, $180 though, ouch. It would still need painted too.

First place I've seen it, thanks.
ECS showed the part number, in case anyone else needs it #3B0898574GRU.

So far the cheapest is: Pohanka VW Parts
https://www.pohankavwparts.com/oem-...5ao_dBJsf9ERtZMDSw8ym9xc_9akXnm0aAto2EALw_wcB
What color? I have access to 7 junkyards.
If you see a rear driver's side wagon door in the darker gray (Silverstone/Urban gray LD7W) let me know....
And where are these yards? I know of the 2 LKQ, the 2 Pull-N-Pay and the 1 down south on 85 by the train tracks but there must be 2 I'm missing ;)
Colorado Auto & Parts near 85 & Dartmouth and the Pull & Pay in Colorado Springs. I saw a grey sedan at the PNP in Aurora today.
Thanks. Found what I needed on CL for a good price. It's a SilverStone gray wagon in great shape. I might end up buying both doors, a rear hatch, a fender. All of a sudden those tiny dings are starting to bother me ;)
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top