Volkswagen Passat Forum banner

wheel fitting question for 2003 Passat 1.8T

31152 Views 10 Replies 10 Participants Last post by  Davethedyer
Hi guys,
After some reading, basically any wheels with 5X112 bolt pattern and Et35-45 offset will fit on 2003 Passats 1.8T ?

I am looking for OEM wheels from VW/Audi Family. I noticed that the 5 spoke Audi A4 from 01-08 is ET45 and some mentioned this will fit fine. Would a 10mm spacer be needed? I am a little confused.

I would like to do without spacers, and a lot of OEM wheels are ET45. Would there be any concern at all with that? I am thinking maybe wider wheels will be better. I would like to stay within 16" or 17".

Also, would i need to buy new lugs if I use any wheels between ET35-45 ?

thanks
1 - 1 of 11 Posts
Im currently running 17x9.5 with adapters they end up being +31 all around with no rubbing. The tires are 225/45 or 40, I cant remember. Its a small stretch. It fits fine. It would definitely rub if I was slammed tho. I think 17X8 +32 with a 225/45 tire would be ideal.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top