Volkswagen Passat Forum banner

spigot rings ?

1K views 1 reply 2 participants last post by  B6 Passat 
#1 · (Edited)
hi i recently got a new set of 17" alloys and noticed im missing 2 spigot rings , standard passat centre bore is 57.1 im sure , how do i know what size rings to get as im getting quite a large amount of vibrating and shaking at the front of the car ?

am i looking at 66.6 to 57.1 OR 73.1 to 57.1 ? :crazy:


cheers for any help
 
#2 ·
Depends on what the wheels are made to. Remove the wheel and look for markings that may indicate which size they are made to, or measure the bore. Standard VW size is 57.1mm, so what O.D. size you need, the I.D. should be 57.1mm.

Nobody will be able to help with out additional info about the wheels.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top