Volkswagen Passat Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter · #1 ·
Hey, im soon to get an ECU for my 98 1.8T, its going to be 1.0 Bar Neuspeed chip, i was going to see if any of you know what the best and most reliable pulgs i should get are; and also soon after those two thing im going to buy an exhast, and i want one thats Cat-less, any comments would be awesome, thanks
 

·
Registered
Joined
·
261 Posts
The OE for the AEB engine is the 3 prong copper Bosch plug. There is no platinum plug listed for this motor. You can also use Denso(#5061 $1.69), Beru Ultra(Z188), Beru Ultra X(UXF79P), Bosch(F7LTCR $8.99) and Denso Iridiums(5304#4 $12.99) to name a few. By the way the AEB coilpacks are made by Beru(ZS016). http://www.beru.com/english/produkte/produktfinder.php?hersteller=volkswagen&modell=PASSAT+(3B2)&typ=1.8+T&baujahr=10/96-11/00&action=step04
 

·
Registered
Joined
·
28,876 Posts
Mexicant_1.8t said:
Hey, im soon to get an ECU for my 98 1.8T, its going to be 1.0 Bar Neuspeed chip, i was going to see if any of you know what the best and most reliable pulgs i should get are; and also soon after those two thing im going to buy an exhast, and i want one thats Cat-less, any comments would be awesome, thanks
I guess you don't plan on passing emmisions testing here. You will need the cat,but can get a high-flow version.

Let me know if you want to GTG sometime,we usually have a good turnout.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top