[Mikey319]

VCDS-Lite Version: Release 1.2
Friday, 04 September 2015, 12:35:40.
Control Module Part Number: 3B1 907 044 J
Component and/or Version: CLIMATRONIC B5GP 0005
Software Coding: 17200
Work Shop Code: WSC 00028
VCID: 28237BA3DBEB
4 Faults Found:
00603 - Footwell/defroster Flap Positioning Motor (V85)
37-10 - Faulty - Intermittent
01271 - Shareware Version. To Decode all DTCs
37-10 - Please Register/Activate - Intermittent
01272 - Shareware Version. To Decode all DTCs
37-00 - Please Register/Activate
01274 - Air Flow Flap Positioning Motor (V71)
37-00 - Faulty

VCDS-Lite Version: Release 1.2
Friday, 04 September 2015, 12:37:21.
Control Module Part Number: 3B0 907 551 CG
Component and/or Version: 2.8L V6/5V G 0001
Software Coding: 07551
Work Shop Code: WSC 00028
VCID: 6AA741AB0567
Additional Info: WVWRH63B22P449576 VWZ7Z0B5217743
2 Faults Found:
18010 - Power Supply Terminal 30: Voltage too Low
P1602 - 35-10 - - - Intermittent
16805 - Shareware Version. To Decode all DTCs
P0421 - 35-00 - Please Register/Activate

VCDS-Lite Version: Release 1.2
Friday, 04 September 2015, 12:38:48.
Control Module Part Number: 3B7 035 180
Component and/or Version: Radio NP2 0055
Software Coding: 04031
Work Shop Code: WSC 00028
VCID: DDCD9A774429
1 Fault Found:
00856 - Radio Antenna
36-00 - Open Circuit


VCDS-Lite Version: Release 1.2
Friday, 04 September 2015, 12:43:15.
Control Module Part Number: 3B0 920 927 B
Component and/or Version: KOMBI+WEGFAHRSP VDO V08
Software Coding: 07235
Work Shop Code: WSC 00000
VCID: 243B6F93A7C3
Additional Info: WVWRH63B22P449576 VWZ7Z0B5217743
2 Faults Found:
00476 - Control Module for Fuel Pump (J538)
49-00 - No Communications
01300 - Shareware Version. To Decode all DTCs
49-00 - Please Register/Activate

These are the codes I was able to get with the lite vesion.

 

[Mikey319]

It is also saying under engine readiness that my 02 sensors failed/are incomplete, secondary air injection failed/incomplete, catalytic converter failed/incomplete, evaporative emission failed/incomplete

 

[Mikey319]

I did the self diagnosing thing with the econ and re-circulation while powering on the car and then let it run through the test. on the left the codes were 25b, 4f8, 4fa and on the right 00

 

[Mikey319]

Bump

 

[scotts13]

Was there a question?

 

[Mikey319]

What can I do to fix the issues lol