Volkswagen Passat Forum banner

Rotiform Cast BLQ Wheel 18” Machined silver

1249 Views 8 Replies 3 Participants Last post by  VAGguy
Hey guys, hope you all had a safe and restful weekend!
I am planning to switch out my 235/40 R 19 92H stock rims with Rotiform 18x8.5 et35 5x100

At the website of UroTuning I have the option to choose different sizes on a drop down Menu. See attached image.
I just goggled my Rim size and Bolt pattern;
19x8 ET48 5x112
Can anyone confirm these numbers? Would that be my actual rim and bold pattern that I need to get?

I understand that I’m downgrading from 19” to 18” rim. My question here is, do i need to get right at my +40mm offset here? I wouldn’t mind being a little over (not flush) if space and Performance allows it!?

Thanks so much in advance! Would love to hear any suggestions, and or opinions 😃😎
Much appreciated!

Communication Device Mobile device Gadget Portable communications device Font
See less See more
1 - 2 of 9 Posts
If you size your tires correctly to equal the same overall diameter, you can do the same offset. You can probably get away with 10mm.

Take a long ruler or something similar length and thin and lay it on the outside vertically across the center of the wheel/tire into the wheel well. That will show you how much room you have to work with.

Pics of how the stock wheels sit now?
  • Like
Reactions: 1
Looks good!
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.