Volkswagen Passat Forum banner
1 - 1 of 1 Posts

· Registered
5 Posts
Discussion Starter · #1 ·
Im new in here and new in forums.
I have the following issue.I have a Passat b6 3c 04.2008 production year 2.0 TDI CommonRail

I have booght the new RCD330 Plus its coming and i think im going to change also the canbus since tha battery drain problem often occurs.

Now i want to retrofit a flat mk6 steering wheel and a new cluster maybe the color one becasue i have the very old one.

But no one in my country never done it,so no service its taking care of it and i have to do it all by my self.

I know that i have to buy the adapter for the cluster from 36 pin to 32 and make vdcs codin e put my KM in it.

Here comes the hardest part and what i dont know.My default steering wheel has no comands and i control my board computer from the shifts.

What i have to get beside the steering wheel,the air bag and the airbag wirnes to make it work.And another thing am i gonna control the new instrument cluster from the steering wheel buttons or from my shift like default?It is a very dificult retrofit proces?

Please i want it bad and i wanna make it advice and help will be very very very appreciated.I have more than 20 days that just see and read infos but still im not clear.please help
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.