Volkswagen Passat Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hello guys
A month ago i bought parking sensors kit from ebay and i gave them to a guy to set them in my car. Now the problem is that i don't want the color of the sensors and i bought another kit from ebay but now the sensors are black (the color i want).
Here is a picture from the current state of the parking sensors with the grey color.



I want now to change only the sensors (replace the grey, with the black ones)


The thing is i don't know where to start. Do i need to take off the rear bumper or i can do that without taking off the bumper.
The Main Control Box is located behind my left tail light.
 

·
Registered
Joined
·
1,204 Posts
It depends on how big your hands are. I would do this with the bumper off. Taking the bumper off is not very hard, once you remove the screws and slide it out you will be amazed how easy it comes off.

Having someone to assist on each side is a bonus, a nice soft section of grass is nice too to rest the bumper on while you work so it doesn't get scratches.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top