[VWGUY4EVER]

So I was looking to get Weather Tech floor liners for the front only - $110.00. Granted it's Texas and usually don't have more than rain to worry about. I volunteer for Meals On Wheels deliveries - my own dedicated route on Tuesdays and sometimes fill in for others. Mud is more my concern than snow. One delivery can be in an urban setting and the next one can be more rural, or even just a muddy, unpaved driveway. Someone posted these on the Sonata forums and I checked them out. 3DMAXpider. Available in "kagu rubber" and a carpet top version. I went with carpet top. Normally around $86 for the front set, I landed one seller with one set left for $68 with tax and free shipping. Fit perfectly and look great.

https://www.amazon.com/3D-MAXpider-...74294828&sr=8-3&keywords=2015+sonata+maxpider

 

[Urlik]

I am getting 3DMAX Spiders for my R. I already have some R Line emblems to replace the 3D emblems. A lot of the Golf R guys have gone with them over the Weathertechs.

 

[VWGUY4EVER]

I considered the Weather Tech long and hard, but then after Salty commenting that his don't fit properly after not being that old, these seemed worth a shot.

Hmm now you got me thinking. Should I get the LIMITED badges - $13 each, or go for the 2.0T emblems lol.

 

[Urlik]

These might look nice too.

 

[VWGUY4EVER]

This one is a grill emblem. Looks to be an easy retro-fit. Just cut the screws down.

K5 Optima Store - Kia & Hyundai "T" Turbo Grille Emblem

These are the trunk emblems. I have a Sport 2.0T Limited. Problem is, these two are adhesive so to how to mount them to the mats.

LIMITED badge - Factory Limited Emblem - Shark Racing

Sport 2.0T badge. Just use the 2.0T and keep the two SPORT's as spares. - Genuine Hyundai Emblem "Sport 2 0T" for 2015 Sonata 86316 C1000 | eBay

 

[Urlik]

When you pull out the old emblem you'll have one hole that needs filling to keep liquids from going through.

 

[VWGUY4EVER]

True. I thought about a little black rtv on the back side or hot glue a piece if rubber sheeting. That's kind of why I'm leaning towards that T-GDI grille emblem. I can re-purpose the one hole. make another and still do the same. Since it comes with that flat black rear support plate, a little glue or rtv between that and the mat should suffice.

 

[Urlik]

I'd be leaning towards the T emblem too, look sharp!

This is what I'm going to do:

from this thread: VWVortex.com - 3D MAXpider Floor Mat...with a new logo