Volkswagen Passat Forum banner
1 - 2 of 2 Posts

37 Posts
Discussion Starter · #1 ·
Today I took out the rcd310 (with bluetooth equipment and mic).

I put in the rns315 but the power dont come on.

Did I pull out too many cables? Attached are the wiring diagram.



This one was connected when I had the rcd310. It gave power to the bluetooth, I disconnected the 2 loose wires (red and black) from the ISO plug. But I dont remember where they were attached...



I've checked the fuses. I guess the problem is located on the wiring harness.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.