[EnjoyTheView]

What do you guys use to mount your eyelids? I want something strong enough that no one is gonna steal them.

 

[MikeVW]

I used the 3M double-sided tape. The one with the red backing. It's holding real good still.

 

[dimafp]

You can use that black stuff that came with it (if you not planning to remove it later) or u can just use 3M double sided tape which works pretty well as well. In second case you might be able to remove it later if u needed, but its still an effort so its not to easy to steal.
good luck.

 

[phantom GLI]

Aren't there some screws that are included in the installation kit.

Can't you just get away with using the screw.

 

[dimafp]

Aren't there some screws that are included in the installation kit.

Can't you just get away with using the screw.

there are no screws in the kit!

 

[PhatRabbitzz]

Aren't there some screws that are included in the installation kit.

Can't you just get away with using the screw.

there are no screws in the kit!

Dimafp is right there are no screws needed for this install.

EnjoyTheView, simply use what was suggested above, the 3M double-sided tape. :drink:

 

[Jesstzn]

I used the 3M tape mentioned .. Just clean the lense and eye lid both very well with IPA first to give it a clean surface.

 

[Curry]

I got 4 screws with mine! I used the 2-sided tape and the screws (make sure they aren't stolen) :thumbup:

 

[dimafp]

I got 4 screws with mine! I used the 2-sided tape and the screws (make sure they aren't stolen) :thumbup:

I guess there is difference between B5 and B5.5 kits. I was refering to B5.5.

 

[jasonmac]

3M double sided tape for me, er, when I finally get them. B5.

 

[Meltemie]

I used the black glue that was in the box