Volkswagen Passat Forum banner
1 - 3 of 2 Posts

·
Registered
Joined
·
2,148 Posts
Discussion Starter · #1 ·
Hi all,
I replaced the motor mounts. Before that I removed the transmission mounts bolts, and exhaust to body bolt as well.

Put everything back together no problem.

now I have to force the gear selector to D (it stays there & triptronic works fine) but won’t move to 4 3 2. It feels as if it is blocked.

No codes and transmission shifts fine.




Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
2,148 Posts
Discussion Starter · #4 ·
It's not too hard to check on a 1.8T.
Did you support the engine and trans while the mounts were removed?
Yes.
I jacked up the motor by the oil pan, pivoting the transmission mounts. (Loosened the transmission Mount bolts)


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
2,148 Posts
Discussion Starter · #5 ·
I checked the cable. Everything looks ok.

Is the shifter cable nut supposed to be adjusted?


Sent from my iPhone using Tapatalk
 
1 - 3 of 2 Posts
Top