Volkswagen Passat Forum banner
1 - 20 of 21 Posts

·
Registered
Joined
·
4,538 Posts
Discussion Starter · #1 ·
My GLX looks naked without good door sills. I was planning on getting the Kamei brushed aluminum ones until I saw a friend's W8 and noticed it had OEM ones. Anyone ever buy these or know how much they would cost? I left a message with my parts guy already. Any other suggestions, and no I don't want LED ones. Thanks.
 

·
Registered
Joined
·
1,403 Posts
i actually say some sexy looking door sills on ebay. i wanted to keep them a secret so that i was the only one that had them. :thumbup: since you created this post i thought i'd share. i have them on my watchlist http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=320066075449&rd=1,1
ihttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=017&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=270075289531&rd=1,1 also found a carbon fiber shark fin antennae, carbon fiber b pillar inserts, http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=300066169348&rd=1,1 i also found this carbon fiber trunk spoiler http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=270073326430&rd=1,1 last but not least...carbon fiber eyelids...would look great with carbon fiber hood. :lol:http://cgi.ebay.com/ebaymotors/ws/e...RK:MEWA:IT&viewitem=&item=160029654837&rd=1,1 just thought i'd share. definately the sills are sick looking in silver or carbon fiber. i wanted to be the only one to have these but i'm a nice member!
 

·
Registered
Joined
·
2,139 Posts
My GLX looks naked without good door sills. I was planning on getting the Kamei brushed aluminum ones until I saw a friend's W8 and noticed it had OEM ones. Anyone ever buy these or know how much they would cost? I left a message with my parts guy already. Any other suggestions, and no I don't want LED ones. Thanks.
I used the black oem vw stick on ones for the mk IV jetta,thats all i needed to keep from getting scuffs/scratches ,not too obtrusive and does the job
 

·
Registered
Joined
·
2,335 Posts
I have the Kamei door sills, they are brushed SS btw. I already had some paint scratches on the sills when I bought the Passat so I had to cover that up.
 

·
Registered
Joined
·
1,403 Posts
if you think the carbon fiber sills would look good with inserts, then get a carbon fiber dash kit! let the modding begin! lol, j/k your taste is your taste. i like the inscription TENZO! i think i'm going to get the black carbon fiber.
 

·
Registered
Joined
·
4,538 Posts
Discussion Starter · #16 ·
Well, I got pricing on silver and black OEM W8 door sills:
Front = $53 CDN each
Rear = $53 CDN each
Total = $212 CDN

www.pgperformance.com has the Kamei set for $110 CDN so I guess that's what I will be getting. The W8 ones would have been nice though. :(
 

·
Registered
2001.5 B5.5 1.8T stick
Joined
·
5,608 Posts
Well, I got pricing on silver and black OEM W8 door sills:
Front = $53 CDN each
Rear = $53 CDN each
Total = $212 CDN

www.pgperformance.com has the Kamei set for $110 CDN so I guess that's what I will be getting. The W8 ones would have been nice though. :(
I can get you a set for $75 shipped to Canada with PASSAT logo or any logo you want... Or just plain, stainless steel sills. PM me if you are interested...
Thanks.
 

·
Registered
Joined
·
394 Posts
a random thought that came in my mind....are these going to affect in any way the way the door closes...ie leaving a gap and more windnoise in the car or water entering? thanks
 
1 - 20 of 21 Posts
Top