Volkswagen Passat Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter · #1 ·
i know someone is going to tell me "theres a thread on how to do this...', look, im looking i just cant seem to find it. please if you know of a thread please send it my way, if not let me know how to do it, i know i have to remove:wrench::wrench: the front sway bar, but to get to the top bolt and have space to pull the starter is the issue. :mad::mad::banghead::banghead:
 

·
Registered
Joined
·
3,103 Posts
Here is a Very simplified video lacking a lot of detail. One Big thing the guy dos not mention is the "aluminum part" (motor mount bracket) has three bolts one of which is a TTY bolt and must be replaced with a new bolt once removed. The bolt runs about $4 or so at the dealer. In addition the bracket needs to be aligned with the sub frame alignment holes when re-installing. You may want to do some research on the parts you will be removing before you start. I have included a couple motor mount diys so you can read more about the motor mount bracket.


https://drive.google.com/file/d/0B2kx8OcCoy0EM2V2MHkyNGRRR1k/view?usp=sharing

https://drive.google.com/file/d/0B2kx8OcCoy0EcVpaRGc4a0JsS2M/view?usp=sharing
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top