Volkswagen Passat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
253 Posts
Discussion Starter · #1 ·
i own some 19" TSW Holstens. when i take a caliper to them, i get 72.2mm for the bore diameter. 73mm rings are too big. 72.6 too big. the 71.6 i have in them from ECS fit, but the bevel geometry doesn't quite match, making them "taller" when inserted. i've tried sanding the rings down a bit to fit but still can't get to fit. thoughts? help?
thanks!
 

·
Registered
Joined
·
112 Posts
i own some 19" TSW Holstens. when i take a caliper to them, i get 72.2mm for the bore diameter. 73mm rings are too big. 72.6 too big. the 71.6 i have in them from ECS fit, but the bevel geometry doesn't quite match, making them "taller" when inserted. i've tried sanding the rings down a bit to fit but still can't get to fit. thoughts? help?
thanks!
sand more? hehe, a quick search yielded no options but to modify a set to work.
 
1 - 2 of 2 Posts
Top