Volkswagen Passat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter · #1 ·
well, i thought i would waste my thanksgiving weekend trying to put my katzkin interior in, its proving to be a lot harder than i thought. i've been searching this but haven't been able to find the details on how to take the bottom of the backseat out. its hinged and folds forward, but i don't see any screws to take it out. this is obviously different from a sedan. there is a plaistic cover over the hinge and there are no screws under there either. this is a 1999 wagon, so if anyone can shine some light on this please help me out.

also where do I get this 12 point torx to dismantle the front seats? i just took the front seat out and took it half apart only to put it all back together again. . sigh.
 

·
Registered
Joined
·
322 Posts
Remove the round screw cover in the center of the plastic hinge cover to access the screw. The removal of the cover will gain access to the hinge pin which can be pushed out.
An auto parts store or Sears should have a torx set.
 
1 - 3 of 3 Posts
Top