Volkswagen Passat Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,648 Posts
Discussion Starter #1
Hi all,
I got an iPod 8) , and I have ordered my Blitzsafe and a car charger. I need to mount them in my '04 Passat GLX (Monsoon). I know the Blitzsafe just plugs right into a part of the harness, but I want to hide the power adapter behind the HU. To do this I need to either dismantle the power adapter and tap into the electrical system, or just put in another cig plug back there.

Either way, this brings me to my question: How do I know which wire is the +12V switched power for the HU? And which is ground? Also, does anyone suggest doing it one way over the other?

Thanks!
Mike
 

·
Registered
Joined
·
1,648 Posts
Discussion Starter #2
Aww, in 17hrs nobody has found their wiring diagram? Please?
 

·
Registered
Joined
·
422 Posts
ttt
 

·
Registered
Joined
·
12 Posts
pinouts

Radio multi-pin connector
assignments, "Premium VI" (incl.
"Monsoon")

8 pin multi-connector I
1 - Speaker + right rear
2 - Speaker + right front
3 - Speaker + left front
4 - Speaker + left rear
5 - Speaker - right rear
6 - Speaker - right front
7 - Speaker - left front
8 - Speaker - left rear

8 pin multi-connector II
9 - CAN-Bus plus
10 - CAN-Bus minus
11 - open
12 - Ground (GND)
13 - Radio, Control signal +
14 - Contact alarm
15 - Battery Positive (B+)
16 - Signal for anti-theft alarm (terminal 30 -
B+)[/img]
 

·
Registered
Joined
·
1,648 Posts
Discussion Starter #5
Awesome stoneman, thanks!!
Quick question though: The "Battery" is the one that is always one (for retained accessory power) and the "Radio Control signal +" is the switched power? If not, which is the switched??


Oh, and any chance of fixing that image tag so i could see the pic you had? ":)
 
1 - 5 of 5 Posts
Top