Volkswagen Passat Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
19 Posts
Do you need to completely disassemble the headlight to replace the projectors? What i mean is do i need to heat the part where the front glass of the headlight is glued with the other part of the headlight to be able to remove/replace the projectors?
 

· Registered
Joined
·
19 Posts
I removed the projectors through the back without taking the front off

So you didn't heated the headlights with industrial heat gun or in the oven to remove the front glass? The reflector can be completely removed through the back of the headlight?

Also can somebody confirm that the Evox-R can be good replacement for Passat B5.5 headlights? Will it fit without any mayor modification?
 

· Registered
Joined
·
19 Posts
Thanks stainulriksen!
You are changing the stock reflector with Evox-R?

I was just interested is it possible to remove the whole reflector like you have it on the picture WITHOUT removing the front glass (which can be done only by heating and melting the glue that holds the glass and the rest of the headlight together)?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top