Volkswagen Passat Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
Just replaced the passengers cylinder head, have everything back together, in all the pictures I took, I cannot find where this 3 prong Pink Plug / connector goes. Been looking for an hour. Bet it’s right in front of my face. Any ideas or pointers? This picture is on the drivers side.


Auto part Engine Fuel line Pipe Automotive engine part

Auto part Fuel line Engine Vehicle Exhaust manifold
 

· PassatWorld Elder
Joined
·
8,460 Posts
It looks like the connection for the knock sensor. One is brown the other green. The green one has like an extension segment that plugs into the knock sensor pig tail and then up to the bundle of connections on the firewall right behind the cylinder head.
 

· PassatWorld Elder
Joined
·
8,460 Posts
F-ME! Passengers cam sensor.
duh. Your right! I had it confused with the knock sensor. I had part of it right. It is the extension wire that runs the length of the engine to the cam sensor.
 

· PassatWorld Elder
Joined
·
8,460 Posts
How about this one? Know it’s the high temp sensor, but can’t find where it goes, it’s the last one and I can bleed the coolant. Any quick answers?

View attachment 89007
That is your ambient air temperature sensor. It snaps into the plastic piece that is at the loop end of the power steering cooler line. Located in the lower front of the radiator.
 

· Registered
Joined
·
56 Posts
Discussion Starter · #10 ·
Ok, I’ll have to find a pic, it does look like it connects into something else. I am also getting a P0118 “engine coolant temp circuit high input” so I assumed it was that. Guess I have to find that now.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top