Volkswagen Passat Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hello. I have recently got my passat 2.0 TDI CR with 110 HP remaped to 185 HP. Before I had this the engine error P2015(Intake manifold runner position sensor) would sometimes come but I would just delete it. After the remap I drove a couple of weeks and the car worked fine until I parked it outside for one night. The next day when I got in it and drove away the car was super slow. Before it had a lot of power from around 2k rpm, but now it does not kick in until 3000-3500 rpm. Lately I have also gottent he p0299 (underboost) error on the engine to. What could be making this problem? Thanks for the answers :D
 

·
Registered
Joined
·
3,388 Posts
Have you checked to ensure all the hoses for the turbo and intercooler are intact and attached?

The boost pressure is increased with the tune which could cause a hose to rupture or come loose.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
Have you checked to ensure all the hoses for the turbo and intercooler are intact and attached?

The boost pressure is increased with the tune which could cause a hose to rupture or come loose.
Nope, but will check today thanks ?
 
1 - 3 of 3 Posts
Top