2007 Auto Scan Report - Steering Assist & CAN Gateway Modules

2831 Views 1 Reply 2 Participants Last post by RichardSEL, Dec 22, 2013

SAVwKO

Discussion Starter · Dec 20, 2013

VAGCOM said:
Thursday,19,December,2013,17:24:59:28896
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.0.0
Data version: 20130910

Dealer/Shop Name: Savko Custom Performance

VIN: WVWKK93C47P053069 License Plate: DUBFTHR
Mileage: 342760km-212981mi Repair Order:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 3C (3C0)
Scan: 01 03 08 09 0F 15 16 17 19 1C 25 36 42 44 46 47 52 53 56 62
65 72

VIN: WVWKK93C47P053069 Mileage: 342760km/212981miles

00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
0F-Digital Radio -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
1C-Position Sensing -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: Malfunction 0010
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
65-Tire Pressure -- Status: Not registered 0011
72-Door, Rear Right -- Status: OK 0000

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 3C0-907-530-V1.clb
Part No SW: 3C0 907 530 C HW: 3C0 907 951 A
Component: Gateway 007 0040
Revision: 00007000 Serial number: 0700C068040579
Coding: 3DFD0D14D31002
Shop #: WSC 00028 028 00001
VCID: 2142055CF8B90A16BBD-8074

1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 1
Fault Frequency: 1
Reset counter: 37
Mileage: 342761 km
Time Indication: 0
Date: 2013.12.17
Time: 05:18:07
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K1 909 144 L
Component: EPS_ZFLS Kl.135 H07 1806
Shop #: WSC 03201 444 63544
VCID: 346CFC08574B8FBE40B-8061

1 Fault Found:
00003 - Control Module
014 - Defective - Intermittent

After getting my car back from the body shop and clearing all of the low voltage codes in every module, these two are the ones that came up that I'm not sure what they're for. I've got some others for speakers that are out and the DV solenoid that isn't being used anymore, and I currently have the Tire Pressure module removed from the install list due to my winter steelies and tires. So why does it say my CAN Gateway module is improperly coded, and what is the steering assist module that is defective? Anything to do with the module on the steering column? Thanks guys.

Save

1 - 2 of 2 Posts

RichardSEL

· #2 · Dec 22, 2013

Got the same CANbus module but different coding. Even though you've disabled module 65 you've not physically disconnected it so CANbus is still seeing that it exists? Did you just untick it in module 19's long coding helper? Just a guess, I've no module 65, I use indirect TPMS. Try going thru the module 19 long coding helper to see whether there's anything there that shouldn't be or vice versa?

You've got a later module 44 than I shown by a fixed assist curve (Kl.135) being in it. Dunno why it's showing control module defective when your steering's working correctly? Try Basic Settings at:
VW Golf (1K) Steering Assist - Ross-Tech Wiki

Let us know how you get on?

Save

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month