04 AWM 1.8T PCV replacement parts

15477 Views 9 Replies 5 Participants Last post by doyles-1.8T, Mar 20, 2012

mohanty103

Discussion Starter · Jun 10, 2010

Hello Folks,
I have compiled a list of parts after reading through the previous threads.
http://www.passatworld.com/forums/showthread.php?t=256898
http://www.passatworld.com/forums/showthread.php?t=310668&highlight=PCV+ETKA

06B 103 245 - "T" shaped bleeder valve
-N 102 581 01 - clamp
-N 907 399 01 - hose clip

058 133 753 D - "Y" shaped crankcase breather valve

06A 129 101D - PCV Valve
N 907 399 01 - hose clip * 2

06A 103 213 F - Breather Tube
-N 904 673 01 - round seal
-06B 121 142 A - retaining spring
-N 907 399 01 - hose clip

058 129 717D - Intake Manifold Gasket

I have two questions.
Am i missing anything?
Is it possible to replace -N 907 399 01 - hose clip with a screw type clamp?
Thanks a lot in advance.

Som

See less See more

Save

1 - 1 of 10 Posts

bill1975

· #6 · Jun 11, 2010

mohanty103 said:
I have another problem, i cant find the part number
058 133 753 D - "Y" shaped crankcase breather valve
anywhere in the car. It was not there in the diagram also.
Whereas i have the pcv valve part number 06A133528A (number 25 in the diagram) which i am replacing as we speak. Is it true that the Y shaped suction pump is no longer there in 04 AWM 1.8T. Thanks.

http://xyrotr1.com/etka/B5.5/1 engine, clutch.pdf

^^^^ Check this link, it's on page 81, part #19. For whatever reason it isn't in the diagram that I posted that you linked too. If you're looking under the hood it is near the firewall, right behind the intake manifold, about 4 inches long. I have an 04 AWM, so it certainly is there.

Save

1 - 1 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month