Search Results for ‘vibrates’

Hi all, 2003, 1.8t, AWM, Bone Stock I had a mechanic shop fixed the exhaust on my car. They simply welded a pipe on the part of the exhaust system that I showed in red in the picture. That section of the exhaust had rusted out, fell and the previous owner didn't fix it. The clamp numbered...

I bought a 2002 Passat 2.0 petrol atf 3 month ago. Last week it starts to shake (vibrate). When I tried to check under the hood, I heard clicks coming form a switch near the air filter. the clicks appears in the right side and vibration inside the car. But sometimes disappears. This is a...

i have replaced the engine mounts with meyle and also the transmission and snub mounts. its still the same. what can be the problem? i have a 1998 1.8t automatic passat. this shaking is incredibly annoying.

Hi guys, I replaced all mountings (Snub,2 Engine,rest gear mountings) 2 months back. And i am not satisfied much because my headlights still vibrates at idle and stop lights. Even some plastic inside cabin vibrates :( I usually feel the most vibration when i cold starts. At first...

1.8T 2002 AWM 123K. Last week I changed the sparkplugs to NGK BKR6E and gapped each one to 0.032. Use 20ft-lbs torque. [Previously indy had installed Autolite sparkplugs, which when I checked, were gapped at at different settings from 0.035 to 0.045 all with different torque, the plug that...

My 98 passat 1.8t when at a red light it vibrates a lot while on drive, so I put the car in neutral and the car idles perfect, anybody know what could it be.

I have an '01 1.8L T AWM Passat. I just replaced the leaking engine mounts with new Merly (sp?) mounts. I think the car vibrates worse now than before. With the hood up, I watch the engine and I shift from Park to D to R. The engine moves quite a bit. The snub mount bushing is still intact...

Crankshaft pulley wobbles In preparation for the timing belt job which I'm doing soon, I put the car up on ramps and inspected various things. I was pretty much looking at what I need to remove for the bumper cover to come off and then for pulling the LC into service position. That all went...