Search Results for ‘vag-com’

I am writing for a friend who lives near Sacramento. He owns a 2005 vw jetta MKIV GLI 1.8T. The fuel gauge is not reading correctly. The fuel pump was replaced. It looks like the fuel gauge needs to be calibrated or set with VAG-COM software. I believe Ross-Tech has step by step...

Hi. Without going into the whole history of my car and its repairs, I am wondering/hoping if there is anyone who has a VAG-COM that can help me out with resetting my ecu. I, of course, would be willing to make this effort worth someone's while in the form of some kind of return...

Hey folks. Been trying to remove my ABS sensors to clean them as I'm getting intermittent ABS/traction lights after driving a short distance and/or turning the wheel. Both front sensors seem to be completely stuck. I managed to wiggle the front passenger side slightly, then the plastic part...

car description: 98 VW Passat 1.8t tiptronic issues/concerns: no power during acceleration no data for measuring block 115 for intake boost pressure current codes: over boost at high rpms (on rare occasions) break light switch F impulse (transmission) car history: 167k miles new turbo new...

Up for sale is my Ross-Tech KEY-USB cable. This is the same cable as the newer KII-USB as far as models that it supports and is a legit Ross Tech cable that allows for full use of their software. The cable acts as a dongle, and does not require software activation like older cables. Simply...

I have a 2002 Passat with monsoon radio. I would like to replace the original radio with a used 2008 monsoon radio that has MP3 built in. Will I need to do anything with coding and/or VAG-COM or something like that to make the new radio work or can I just enter the code for the new radio and it...

So i think the throttle body on my 1999 VW Passat 1.8T AEB is shot but I would like to hook a Vag-com up to it before i spend the cash on a new TB. If anyone in the Olympia WA area can help me out i can toss some cash your way I need my car before WED night that the start of my work week

Okay! My first thread! Kind of excited. Hopefully I can share some somewhat useful info and learn somethings as well. Here we go! I am starting this thread to see if I can find info on options for VAG K+ Can cables and the software used to communicate with B6 Passats. I recently purchased a...

Hey guys! First off I have a 99 passat 1.8t. I had a water damaged TCM that wouldnt even let me open the controller with VAG-COM. So I replaced it with a "new" one that was the same model number. I also replaced the harness along with 12" of wire. Everything seems to be running fine! It shifts...

I don't have alot of extra money just laying around. I am hoping that someone near Abilene, Texas would let me borrow their cable. It would be much appreciated. Thank you in advance.

Can anyone share a list of what changes you can have to the basic setup through VAG-COM ? I thought that this would be useful for when I talk with a garage who have a vag-com machine. Best to make all the changes at once. I read that one change is to automatically close windows/roof triggered...

I thought it would be a good idea to list some of the VAG-COM/VCDS procedures for B5 & B5.5 Passats, as I could not find a compiled list that was Passat specific in all my searching. I'll try to add stuff to this original post as people post below. I'll start out by indicating how to initiate...

Hello, My passat 1.9 TDI AFN 110CV go into limp mode sometimes. Error with VAG-COM is 00575 Intake Mainfold pressure. A logger for MAP / MAF and altitude pressure is shown: Please, could someone indicate that is hapenning? Could the barometric pressure be the problem??? Where is this...

Guys, I'm looking at getting a vag-com cable to run diagnostics on my cars. I have a mk3 golf and have recently bought a 2004, 53 reg Passat 1.9 tdi 130 estate. The alarm keeps going off (always in the middle of the night) and it's been into the garage. They cleared some errors on the CCM...

I have a 2002 1.8t with 100k miles. The check engine light came on today and need to know what is going on. Anybody have a scan tool near by or know where i can get one really cheap. We are hoping it is something easy and inexpensive to fix. Just did the timing belt and Water pump and...

Hello everyone, I got into an accident in my 2002 v6 passat. I ran into a truck in front of me and the guys hitch went right through the hood and punched a hole in the rad and broke the cam gear on the left side of the engine. We replaced the radiator, bracketing, air box, air condenser, cam...

Hello everyone, I got into an accident in my 2002 v6 passat. I ran into a truck in front of me and the guys hitch went right through the hood and punched a hole in the rad and broke the cam gear on the left side of the engine. We replaced the radiator, bracketing, air box, air condenser, cam...

Hey guys, after my 3.2 v6 2008 passat being involved in an accedant having seat airbag deployed, I replaced the airbags, and cleared all DTC's by Ross-Tech vagcom VCD 908... I got all lights on dashboard ok except airbag fault could not be cleared, after following around I had to order new...

Hello Fellow VW:thumbup: I have a 2000 VW Passt B.5 with 87k, I bought the car last May 2009 and still running great, but I have couple of issues and its been there ever since I purchased my passat. I'm getting solid abs light with flashing brake warning sign. So i did some research and I think...