Search Results for ‘torque’

Hello, I am a new member here and I have a 2000 Passat GLX v6. I have been using OBDeleven and when I scanned my car I found a P1811 code that is labeled torque converter lock-up clutch. Under the description it reads, "Excessive temperature preliminary stage reached". This is very concerning to...

I am rebuilding the heads due to bent valves, and need a few torque specs. My head bolts are the T30, Non-stretch. Dont know if that makes a difference. Specs needed: Cam caps Head bolts Exhaust manifold Intake manifold Thanks!

Hello, Well so far I have been able to tackle all the issues my 2001 Passat 2.8 GLX has thrown at me like having to replace the Variable Valve Solenoids. My latest issue that has cropped up is this annoying jerking or bucking sensation which is most prevalent at 50 to 70 kms/hr speed. It...

2003 Volkswagen W8 4.0 torque converter making noise and giving camshaft position sensor code I just bought it a month ago and now it won't start at all

We just spotted an Autoguide.com favorite 1/2" drive torque wrench on sale via Amazon.com. The Tekton 1/2" drive torque wrench is rated for 10/150 ft.-lb. and features sturdy all metal construction. With the current 29% discount, it's priced at only $28.50! Read More About The Torque...

Have 1998 Passat. Replacing all front control arms and shocks and tie rod ends (doing brakes as well). Need torque settings for the lot. Have tried searching but not found a nice clean list....

Hi. 2004 passat 1.9 tdi tiptronic is having some problems when driving on highway. When the car reaches 60mph the converter seem go on and off. I bit of shuddering appears to. Whats going on?

Hi All, I search this forum and googled but I haven't found the torque specs for my 2004 Passat GLX V6 2.8 FWD- Front Driver's CV Axle. I bought new bolts for the inner and a new 17mm bolt for the outer and I'd want to torque them down correctly. What I found this far in existing posts was...

I understand there are upgraded TC's?? 04 passat tdi

Hi Friends, Need help diagnosing as I can't find many details on TC issues. I think it is an issue with the converter locking/unlocking and have nailed down how to reproduce and work around it. Car: B5.5 V6, 166k Miles, Tiptronic Symptoms: Occurs when driving between 40-60 miles on high...

Hope this is the correct place to post with an issue. 2002 4motion 115K not particularly well taken care of (FAS 5HP-19 Trans) and it seems to be high RPM for the speed 2k 60mph +/-. I have watched the gear changes through VCDS lite it changes through all gears smooth, indicates TCC open then...

Now for a light one... I've seen different torque numbers for the Passat 2.8 V6. For example, Edmunds specs for the car say 190 lb-ft, Wikipedia says 206 or 221, etc. Doesn't seem to be a matter of different engine codes. It's just a matter of curiosity, but is this reliably detailed...

I've been a member since 2015. For some reason I am only able to post in Noob Tube and not in the b5 forum for questions I need answers too. What gives? :banghead: I need torque specs for 04 GLX v6, transmission mounts and the 3 hexbolts that mount the bracket to the side of the transmission...

2002 VW Passat 2.0L AZM Engine I am doing complete A/C components replacement due to failed compressor (metals particles found in lines). Except hose lines (which i plan to flush it) and will replace all other parts. I will be installing all this week, can i have the TORQUE values with units...

Any help on this will be much appreciated! 2005 Passat TDI Wagon - This all started after a bad alternator regulator which was producing electrical spikes read up to about 16- 16.5 volts on a multimeter. Whether this actually led to the tranny problem, who knows for sure. - After the...

My 2000 Passat (167,000 km, 4cyl turbo, leather, auto, sunroof, etc.) was stolen on a few weeks ago. The police found it the day after. Best car thieves ever, I have to say, as there was absolutely zero apparent damage other than the door lock was "punched" and the ignition lock destroyed...

I've seen torque specs for the inner tie rod, which I assume are the large (slightly larger than 1 1/5") nut. I can't imagine how it would be possible to gauge the torque on that nut. Do I just tighten it very firmly?

Behind the torque converter oil seal there is a type of thrust washer the shop manual refers to as a bearing ring. There are two flat edges and other parts are contoured round to fit the circular opening. There is an oil passage hole on the right hand side where the seal and Bearing install...

Hello world, My 2006 2.0T sprung a leak and was out of transmission fluid about 25 miles into a trip before complete loss of power at the wheels. I was in a very bad area and was being surrounded by a gang of people at 2am. I was able to get the car moving at 6k RPM's so I drove a block and...