Can someone please post the diagram or list the correct steps to check wires from throttle body to ecm? I am pretty sure my throttle body is bad but want to make sure my wiring is good first. Thanks

Replaced CAT/Seeking Guidance for Logical Steps to Clear Current Faults & Pass Smog 98 Passat 1.8T 4 Cyl Wagon Hello, I would appreciate anyone willing to guide us in the logical steps for process of elimination in order to get this car running properly, to become legally smog certified, and...

CEL came on with P0411 (I think I'm remember correctly) - SAIP incorrect flow or something like that. Here are the repair steps I took: 1. checked all vac lines. 2. removed air line from SAIP and tried to blow in it while cold - unable to blow air in which means the combi valve was closed...

MAF code and reading less than 1 g/s So, as per this thread: http://www.passatworld.com/forums/42-volkswagen-passat-b5-discussion/358039-my-1-8t-oil-leak.html#post2973021 I just did the PCV valve and a gasket change in my 1.8T (2001 model, engine code AUG). Once I finished that job I had a MAF...

Hi folks, I've had the ABS light on along with the blinking Brake light for a while. I've done research on P-world and found various instructions on how to replace the module. I basically have 2 questions before I get involved with doing this. 1 - Has anyone purchased a rebuilt ABS module...

My 4motion 00 has this eletrical problem, when I turn the lights on my brake lights goes on too, and during the day when I don't need lights if I step on the brake my dashboard lights goes on...:crazy: what could be the problem, I already changed the brake switch

MY flexpipe on the exhaust headers has a hole or something and I have an exhaust leak, how hard is it to take one of these off? i've done it on civic's before not on a passat. What sizes are the bolts? and how many are there? also is there a thread on converting or putting turbo kit on the 2.0...

Car: 1998 GLX, 121k miles. I've had a CEL for a couple months, which Advance Auto scanned as a "generic o2/cat fault." Since the car was/is still running fine with no loss in economy, I didn't take any immediate action. I'm hoping for a VAG-Com for Christmas, so until then I'm just sitting...

ok. so say i went and got the 6 inch random orbit from autozone. what all would i need to remove swirls and get some good shine out of my paint i just want to know the process.. wash claybar than what? and where can i get most of the products. like #21 i dont think i found it at autozone...

My rear lights have been getting worse lately from oxidization so I figured i'd take the afternoon and sand them down. You can see how bad they are in these pictures. I took pics at each step to show how I did it. My method wasn't as involved as some I've seen on here and I got great...

Definitely a change for me, since all the cars I've owned have been either red or black. But I just couldn't pass up the deal I got on this one.. granted, the car didn't run well when I picked it up, but a year and a half later, she's come a long way... When I picked her up: A year and a half...

ok, more steps than that but I'm feeling a bit like a tv ad guy this morning. :lol: Anyway, here are the basic pics. I'll fill in the info later when I get a chance. I think I have more but I just need to throw them up on my host.

How to replace your VCG in 1,000 easy steps. I know this has been talked about ad nauseum, so I'll try to get to the point. My valve cover gasket had been leaking for almost 30k miles before finally fixing it for good. Let me explain why this is so important to me.... 1. It took repeated VCG...

So I've had a signal noise issue on my Farenheit (Power Acoustic) 10.4" LCD screen since about 6 months into ownership. I've dealt with it for about 3.5 years, it wasn't bad and I just chalked it up to sensitive electronics/not a good ground. Last week when I rewired everything the problem got...

If it is a repost sorry, but I thought it was funny http://eurotuned.com/multimedia/gti_vs_civic.htm

Step 1: Install cheap, egg-shaped aftermarket Pro-Line wheels on your VW. Step 2: Come to my dealership complaining about a driveline vibration. Step 3: Throw a huge, nasty hissy fit when you're told the vibration is due to your completely out-of-round shit wheels, while insulting every...

ECS Tuning now has replacement rotors and pads available for the W8!! :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow:

can any one give me some step by step instructions and a list of parts that i need to do the rear fog install ?my car is going into my friends shop tomarrow and i would like to do this mod while i am already working on my car thanks guys :bow: :lol: