Search Results for ‘spacer’

Tuners, if your running an aftermarket exhaust, or testpipe (with bungs) you may need this little jewel. $12 + ship.

I have a 2000 Passat 1.8T with stock ride height etc. However, I am running 5 Spoke Audi A4 wheels with 235/45/17 tires. I was wondering if adding a 15mm spacer in the rear would make the wheel stick out too much? I am especially concerned when the car is fully loaded, is there a chance that...

I have a '14 Passat with OEM Bristols, and I haven't been able to find anything about the type of spacers to use for them. The popular spacing for aftermarket rims seems to be 12mm front and 20mm rear. My measurements from the widest part of the sidewall to the outside of the fender was about...

Hey dudes making my first post anyone aware of the thin plastic spacer gasket between air filter and mas housing. Took the mas housing off to clean mas put back without spacer threw away after putting housing back and found on floor thinking it was really nothing now getting p1177 code mechanic...

I picked up a set of OEM Denvers recently. I've sanded and filled a few imperfections and will be painting them today :thumbup: The wheels are 17x7.5 ET51 so I plan on running 15mm spacers. Having never run spacers before I'm wondering about installing them. Specifically wondering about...

http://i.imgur.com/mldx0Bh.png A friend gave me an old set of Audi rims for me to put on my 99 Passat since mine are garbage and need tossed. I entered the old and new rim info into a calculator and this was the result. So if i am reading this right, I will just need to purchase 20mm spacers...

Untitled by vwb5t, on Flickr Have to find the hardware and might be able to find the gaskets, but either way 40 shipped for it.

are all oxygen sensor spacers the same? i have both cats reading bad on my A6 C5 with only 80k-ish miles. the CEL has been on for both cats since about 70k miles.i dont know if its really the cats are bad, or if my flex pipe exhaust leak is causing the codes. i would like to pass smog here in CA...

Like title says.. pm if you wanna get rid.of one

KII-USB rosstech cable sold

Hey fellas, switching out the winter wheels for the summer wheels, and this winter made everything nice and rusty. My spacer was seized on the wheel, and I had to hit it with a hammer, and eventually pry it off with a screwdriver between the spacer and the wheel. Needless to say, the spacer got...

I recently lowered my passat b5.5 about 1 inch to 1.5 inches off the ground. I wanna get spacers so my rims will be flush or almost flush with with the fenders. Do any of you guys know which size spacers I would need? I have 18x8 rims on them with offset of 35.

SOLD SOLD SOLD !! Hub and wheel centric spacers, 12mm and 15mm with complete set of correct length ball seat lugs (black), work with 5x112 & 5x100 $125 OBO plus shipping.

hi all i currently have audi a3 sport alloys (17's) with a et of 57 im wanting spacers but im wanting advice on how much currently the passat have been lowered 40 from standard , i was thinking 20mm all round some have said 30mm on the rear 25 on the front , how ever 30mm on the rear would rub...

Ive searched.. and gotten tired of searching without finding a definite answer. Dont yell at me! :D Okay I have B7 A4 wheels, 17x7.5 ET 45, and want to be flush without rubbing on Koni Yellows with H&R springs. Its not that low, looks good tho. I'm thinking a 5F 15R spacer set up is what I...

I've searched the site for almost 2 hours reading about rim spacers but all seem to be related to either a "sucked in" look or spacing out for an aftermarket wider rim. I rotated my tires this weekend for the first time of owning the car and found a small ring (doesn't look like any rim spacer...

Is there a difference between these two kinds of spacers?are they different at all? meaning the flat surface of these Rather than the bevel/small taper on these?? can these only be used in the front?or how does this work?? help...thanks

Alright my passat is lowered and i wanna buy some spacers but when i have the spacers on i want the wheels to be flush with the body. Does anybody know what size spacers I will need? Will i have to go bigger in the back or can they all be the same size?? I need the help!!