Search Results for ‘sensor’

Okay. I'm new here and this is one heck of a first post... Anyways! I'll make this bluntly simple. CAN SOMEONE JUST BLUNTLY TELL ME WHERE THE DANG THING IS?! I know it's related to the intake manifold and it's POSSIBLY on the side but that's about all I know. This is my first VW and in...

I have problems with Climatronic HVAC (A/C) system in B5 Passat. I was able to diagnose the problem using the Climatronic interface and channel 40 ("Evaporator Temperature - Actual value") says that the evaporator temperature is -51 °C (-60 °F) which is obviously not the correct reading. (Press...

I recently replaced the front pipe (also called an "intermediate" pipe or flex pipe) on my 1.8T exhaust. To do that I had to remove the catalytic converter. While I had it out I thought it would be a good time to recoat the o2 sensors with antiseize since they're the original sensors 15+ years...

I just picked this car up yesterday, 3 hr drive to get it. 42K miles, veryu clean. the dealer that sold it said they just replaced a rattling converter on it. They got a check engine light, R&Rd the sensors, cleared the codes. they thought it was "leaking" exhaust at the sensors. I'm supposed to...

Hi, I have problem with temp. on dashboard. Suddenly, temperature drops. When I hooked up VCDS I have two different results: About 3 years ago, thermostat was changed. Thanks to all.

Hey guys I’m back and decided to make a fresh post now that I have a proper vag tool. 2001 Passat 1.8l AWM knock sensor is reading low voltage. I’m on measuring block 26 and sure enough knock sensor is reading low voltage. Cyl 1: .23v Cyl 2: .23v Cyl 3: .35v Cyl 4: .35v When I rev the...

Hey guys I’m a new vw owner and I’ve been running into this code that keeps coming back. I’ve got a 2001 Passat 1.8l AWM automatic Here are the codes: P0327 - knock sensor 1 circuit low input 16711 - knock sensor circuit low bank 1 - no indication on display 16795 - secondary air...

Yesterday I was caught by surprise when tried to start the car (1.8T 2002). It took several attempts to crank the engine but then instantly got the EPC light and high idle. Based on what I read in the forum, the culprit should be a bad crank position sensor. Is that a right assumption? Or should...

I have a 2012 VW Passat 2.0 TDi Station Wagon and I am having issues with the dashboard being festooned with the ABS, Power Steering, Traction Control etc yellow warnings and have traced the issue to no signal from the rear left ABS Sensor using VCDS. Initially, I removed the sensor and refitted...

Hello all, my 07 passat wagon 2.0t has been experiencing an abrupt bog when engine speed hits 3000 rpm. the car has no other issues and once it does it it won't reoccur until the car is shut off and restarted. also causes the car to idle around 1000 rpm until restart. i scanned and got a p0321...

Can someone help me out..i got an incorrect gear 4 ratio error and im trying to deduce the exact problem before spending any more money.. I want to know the values of transmisaion range sensor..engine running at stanstill.. Mine is 0% but there is a delay in pick up when moving.. Is it...

05’ AWM 1.8t 4motion Auto Can the cam position sensor that is bolted into the cam be removed by just removing the bolt? I need to replace the seal there.

Hey team, I believe that I have 2 bad knock sensors on my 2003 passat v5. I am keen to try and replace the sensors myself but I'm struggling to find any info on where they are located. Also once they are replaced will the ecu need any sort of rebooting/ calibrating to work with the new sensors...

Removed the Tork head bolt and I can rotate a few degrees each direction but refuses to come out even a little and I cannot really see anything. I understand there is a ring-rubber seal which is probably the culprit. But any ideas how to make something to exert more power that my hands have...

My problem is, I replaced my wheel hub due to bearing failure. I destroyed the original sensor when removing. I installed a new hub with a new sensor. I have an abs fault now with the wheel speed sensor. I thought that I may have bought the wrong sensor so I replaced it with another new sensor...

Putting wife's 1.8t back together after head swap. don't know where this sensor came from, what it is or where it goes. I'm stumped. Located driver side by radiator (it might belong inside the engine bay and got caught outside when I was putting the front end back on in the dark. I'll try to...

Hi all. Has anyone come across this fault code 00553 Mass Air Flow Sensor (G70): Implausible Signal (No dash warning light illuminated) I'm struggling with this one and could do with some advice.... My 2000 Vw Passat TDI (AFN) has lost all it's power, if i drive it with very small throttle...

i have a2001 B5 2.8 passat wagon , with a no start situation , put scan tool on and comes up with P0341 camshaft position sensor circuit range / performance code . installed a new bosch sensor , clear code and still wont start , tried clearing code again , but the same code always comes up after...

Hi does anyone know if the lambda sensor affects the mpg readout. My mpg readout is all over the place ticking over at 12mpg but accelerating at 27mpg and everything in between. When I lift of accelerator completely still reads 53mpg or 30mpg just depends how it feels cheers Sent from my...

All, I purchased a used 2002 VW Passat (30v V6) for my son that wasn't running at time of purchase. I bought it as a project car for he and I to work on and have it be his first car. The timing tensioner pulley had failed and wrecked both heads. I've been able to navigate that and have...