Volkswagen Passat Forum banner

relocation

  1. USB1 Relocation

    New Member Introductions
    Just came home with a new SE. Overall, love the car and the features. Only issue I am noticing is the USB1 port. Using any standard USB cable you can't close the latch. Has anyone relocated the USB1 or rerouted the cable. Was debating drilling through the back and snaking the cable near the...
  2. Need help installing oil pressure gauge using a 42DD relocation kit

    Volkswagen Passat B5 Discussion
    Which port do I use on the oil filter housing?
  3. Diverter Valve Relocation Question - 1.8T AWM

    B5 Garage
    Quick question that I swear I searched for! that I can't seem to get answered. I found some suitable parts for this particular job but I'm a little confused onto how this will work. A few posts I read mentioned that the fact that the intercooler pipe that feeds into the throttle body has a MAP...
  4. Dv relocation

    Volkswagen Passat B5 Discussion
    Hey guys I saw this has been done before but none of the threads have pictures that work. Anybody have a link?
  5. n75/diverter valve replacement and relocation

    B6 Garage
    hey everyone, this being my first post on work i've done to my 06 2.0 fsi passat, i want to share what i have learned so far. i replaced my diverter valve with the recommended piston design for chipped applications and attempted to replace the n75 valve about a week ago. i typically depend on...
  6. For those of you that did a DV relocation on the cheap...

    Volkswagen Passat B5 Discussion
    If you used parts from lowes/home depot, which I did as well, after a period of time check your Tee and barbed coupler for defects! I used the heavy duty plastic pieces from the hardware store and after about two years the Tee fitting warped to the point that no matter how much I torqued down...
  7. DV relocation DIY?

    B5 Garage
    Hi, All the DIY's I've found are without pics. Anyone knows about one that is complete? I want to relocate my DV. Thanks! C PS: B5 1998
  8. Finally DV relocation, questions

    Volkswagen Passat B5 Discussion
    Not new here, but I feel like I'm asking noob question. I got my Forge DV relocation kit today (yeah, I paid for it, who cares) and just want to know exactly which port to plug once it's moved. It appears my options are plug turbo outlet, or plug intercooler piping. I'm not sure which, I've just...
  9. 42 Draft Design Oil Pressure Relocation Hose Issue

    Volkswagen Passat B5 Discussion
    I install a NS oil press gauge using 42DD oil press relocation kit. Been running it for about 2 months now. I noticed some bubbles/bumps in the hose just below each crimp fitting, also seeing some spots of oil when i park occasionally. Anyone experienced this problem? Im looking to replace the...
  10. My FMIC install + DV relocation thread

    Volkswagen Passat B5 Discussion
    After doing some research I decided to install a FMIC on my 2000 B5 (ATW). My main purpose is to prevent heat soak, especially now that summer temperatures are here. About a year ago the car was chipped with APR and even though I have all the programs (special deal) I pretty much run the 93...
  11. Relocation of DV, now no noise :(

    Volkswagen Passat B5 Discussion
    I just relocated my diverter valve from the bottom of the motor up to the top in front of the airbox. I used 1" heater hose to run the vacuum lines coming off of it. There is more distance for the air to go, and I'm wondering if this is why it isn't making nearly as much noise anymore. Before...
  12. FS B5/5.5-Forge DV, Complete Samco Intake w/ DV relocation, and more!!

    Classified Archive
    FS B5/5.5[PICS ADDED!]-Forge DV, Complete Samco Intake w/ DV relocation, and more!! Hey everyone, My passat was hit in the back by a drunk kid in his mom's minivan a few weeks ago while it was parked in front of my house. :cry::mad: My buddies 328i was parked in from of me, so my car got...
  13. bad blow off flutter after dv relocation

    Volkswagen Passat B5 Discussion
    So i just relocated my forge splitter valve and it was fluttering slightly before then because it wasn't perfectly adjusted for the boost, but after I relocated it, i thought i adjusted it properly except now it seems like the splitter is blowing off fine and the fluttering sounds as if it is...
  14. Gas Button Relocation

    Volkswagen Passat B5 Discussion
    Hey Guys i have a :b5: and i recently upgraded to the :b55: center console with the cupholders. awesome upgrade as most of you know. to the point... the old console had the button in the middle of it near the ebrake, and i wanted to know what others have done to relocate it. i could cut a hole...
  15. dv relocation DIY???

    Volkswagen Passat B5 Discussion
    I remember hearing about a Dv Relocation Diy somewhere but after a lot of searching I can't find it any help? :)
  16. 42DraftDesigns Oil Pressure Relocation kit and VDO Oil Pressure Sender Unit

    Classified Archive
    *SOLD* Please delete
  17. FS: Project Turbo Kit, Project FMIC, Project DV Relocation kit

    Classified Archive
    Hi, I've got a few parts left over from my B5 days that I'm looking to sell. Descriptions are below. Contact me at [email protected] if you have any questions or if you would like to purchase anything. Thanks! Tony DIY Project Turbo Kit for sale. I bought this kit second hand for my B5...
  18. WTB: 2"x2"x1" T-Connecter for DV Relocation

    Classified Archive
    I am looking for this TB to IC T-connecter to do a DV relocation with. I am looking for a thin, metal one, such as a Forge or similar. Thought I would check here before spending $31.50 plus shipping for the Forge one.
  19. DV Relocation

    Volkswagen Passat B5 Discussion
    Ok, I have a few questions about this. http://www.passatworld.com/forums/showthread.php?t=161749&highlight=relocate This is Rusty's FMIC install, mostly with just pictures. http://www.passatworld.com/forums/showthread.php?t=209580 And this is Dutch-Mountains write up, whichs is very helpful. So...
  20. WTB: DV relocation kit

    Classified Archive
    Or parts for it. Prefer Forge... http://passatworld.com/forums/showthread.php?t=218588
Top