Search Results for ‘piping’

Trying to chase down intermittent vacuum leak. Noticed what appears to be an open elbow out one of the ports of the N112 solenoid. The other two ports are vacuum source and combi valve. Can someone verify that this is supposed to be capped? I cannot see any other purpose for this port or...

Hey everyone Does anybody near Allentown or Philadelphia do custom straight piping? I'm looking to get a setup for my 2004 1.8t that's not too expensive. If anyone out there does this or wants to just respond and give me a cost estimate. Thanks! Oh and I would want 2.5" piping from my test...

Hey all, I got the hard piping figured out, but I need to figure out what I need for charge piping. Decided to go with 2" aluminum charge, 2.25" aluminum hard piping. Anyone that's done their own custom piping or have an ebay kit that can tell me what their charge piping (from turbo to...

I'm looking for some fmic piping for a 2000 atw, pm or text 505-331-0229 with a price shipped to 87124. Thanks.

Which piping is better to use on a b5.5 passat AWM motor B5 A4 or B6 A4 piping B5 A4 kit B6 A4 Kit Want to do as little cutting as possible. Thanks

**SOLD*** As the title says, I have a RACETEC FMIC core + mounting bracket for sale - NO piping. Its in good condition. I used this on my B5 K04 and it worked worked great! I might have some T-Clamps sitting around but I'd have to look if you need 2 of them. Fits 97 to 01.5 Audi B5...

I have had a change in plans...I'm going to leave the passat alone until we get another car and it becomes the third car! I have a new never used Godspeed intercooler with the piping. The piping is currently at the powder coater getting coated gloss black and having the map flanges welded on...

I installed a to3/t04 turbo. works well. but when i try to really punch it and hit about 10-12 psi, the intercooler piping pops off. Ive heard the trick of using hairspray and tclamps. what do you guys think?

I want to get a FMIC for my b5.5 passat 1.8t and i was looking at a few brands...i think i've decided on mishimoto...now does anyone have any idea where i could get intercooler piping? perferably pre bent but if not who could bend pipe? also i know nothing of piping...i want to upgrade to a k04...

i just pulled the motor and tranny out to replace the torque converter seal that blow out on me. and i noticed i had traces of oil in my inner cooler and my breather hose was broken at the -t- and there was oil deposits on the block below it. would the breather hose being broken have any thing...

Hey i just got a Pwr Front mount intercooler. All i need is a piping kit for my B5 passat 1.8t 5 speed. does anyone know were i cand find a complete piping kit including the dv mount?? Do any of you have a kit that you want to sell me i have paypal

A good friend has a 2000 1.8T FWD thats having some issues. i got a call about a week ago saying she got a oil pres warning, and a message saying stop engine immediatly. so i had her check the oil, there was none (it had been about a month since she had checked it)i told her to get someone to...

I am getting a custom exhaust done, but no shops around me do mandrel bent pipes, so I am going to order 2.5" borla mandrel bent stainless piping and I am going to have a shop cut and weld me an exhaust from it. My question is how much and what (i.e. u bend 90* bend) piping will I need? Nick

Model: B5.5,1.8T, MANUAL, FWD, APR ECU, KONI CUP KIT, FORGE 007 Setup and Sound description: thats the setup i have now, with hidden tip, so its stock like from outside, its fairly quiet when accelerating slowly, but very deep! when you accelerate harder its much louder but very deep and...

So I just installed my FMIC using Marine Exhaust tubing like some of the other guys here on the board have done. The inlet on my FMIC is 2.5" and the outlet is 2.5". Obviously the cold side of the system is a no-brainer, 2.5" all the way (except I bought something in the classifieds this week...

Hello, I have a question for people that are using either a GT30r or T3/T4 that have a .60 housing with the ATP T3 Manifold on how the intake setup is going to look like. Mainly how does it connect to the boost pipes. I'm looking on swapping it on the car fast as possible because my K03s...

would 2.5" piping be too big for my car? i have a k04. should i go 2" or 2.5'" piping for my FMIC.