Search Results for ‘p1423’

Started car today and it would barely idle much less run down the road. CEL on. Plugged good plug into each wire coming from coil pack. All seem to be firing OK. Removed LH valve cover and tensioner and chain OK. Put cover back on and road tested. Ran OK for a few blocks, then SOS. Codes are...

So I started a conversation with Steve from Chicago.. and he suggested I start a forum up about it. Here is the conversation and I hope somebody can take it somewhere from here and also offer some advice or past experience with the issue. Thanks Steve, I see you're somewhat of a residential...

I have a 2000 Passat Wagon V6, I have the CEL light on and it reads the codes mentioned. The strange thing is that the engine is smooth, runs like new! The only problem I have tracked is mileage, I am getting about 240 miles a tank! YIKES! The P0300. 04, 05: I feel nothing, the engine is...

Hello all and first let me say thanks to all who have posted here, you guys and gals have helped me learn such and helped me save so much money working on my car. Here are the stats: 2000 B5 2.8L V6 FWD 5 speed Vacuum lines and fuel filter replaced by my indie mechanic CTS replaced by me last...

I've had the p0411 and 1423 codes plenty of times, replaced rivets in pumps, vacuum lines, Kombi Valves etc etc. Originally had both bank 1 and 2 flow codes, so I started with simply buying a new relay cause why not, as well as 4-6 ft of vacuum tubing and replaced piece by piece from the...

I pulled the connector to the SAIP, and did not find voltage present for the pump on cold start. I verified that coolant temp was below 35 c. around 33 actually. Does this point to the J299 relay, or could something else be amiss? thanks:wrench:

Hi all! I worked on an 02 V6 today. The check engine light was on with codes p1423 & p1411, which indicates insufficient flow on the combi valves. I checked the valve that provides the vacuum to the combi valves...on the set of check valves on top of the engine, it is the one on the farthest...

So far this site has been awesome, all of your suggestions have helped me with all my problems. I started off with about 5/6 codes, now I'm down to the last 2. I have been trying to troubleshoot, and they still keep coming back. Any suggestions/tips/help is appreciated. Has anyone had these same...

i got my codes down from 6 to 2. the codes left are: p1411 and p1423 they are for bank 1 and bank 2 SAiP. so far ive checked my saip, its perfect. then the plastic hoses , perfect. then vacuum hoses - all brand new now all i have left is the N112 Valves and possibly egr valves. since i am...

I have an on going P1423 - Secondary Air Injection System, Low Flow Bank 1. The SAIP pump is running and only one bank is affected so I assumed the combi was plugged. I took it off and didn't find a lot of blockage as I could blow air through the valve with my lungs fairly easily. I went...

Ok so i got this 2001 passat like a month ago with low 60k on it. Last night i got the Check Engine light on and i did an inspection on it The above codes are the ones that came out. I am more worried from P1602 however it might be from the new battery? I also read that it might be caused...

I am only getting one Code P1423 - Secondary Air Injection Bank 1 flow too low. I have just purchased this car and the previous owner had all the work done at the dealership. For almost four years the same CEL code has shown this P1423 code. The combi-valve has been replaced several times as...

Hi all, I have a '00 4mo wagon (ATQ V6) which we bought new, and which has 89k. We have been having issues with the check engine light coming on/off, but recently mostly staying on (I've been reseting it with a code reader from Autozone). It just passed emissions testing the other day, and...

I know there is an issue with the catalytic converter based on the p0420 but what do the other codes mean. Searched and came up with "Secondary air injection system flow too low Banks 1 and 2" What do I need to do now? This is a 2001.5 ATQ 4 motion. Thanks!

I need to replace the lines to the combi valves, hoping to erase codes P1411 and P1423. Anyone got a pic of the valves and lines? I don't want to make a wrong move!

about 3 months ago my v6 2001 gave me a warning" stop driving" I did immediately, the car was down 2.5 quarts of oil ! I last checked the oil when I changed it 5600 miles ealier. No spots on the driveway, no blue smoke, it drives fine but now burns a half a quart every 2000 miles. last week...

Got my first check engine light at 55K along with the Emissions Workshop message. Autozone gave me the code of P1423 EGI Failed Function Test. Does anyone know what this means?? Yes, the gas cap has been and is tight. Would this have anything to do with the MAF...or maybe a vacuum leak...