Search Results for ‘p0302’

Hello everyone, Joshthenotsogreatmechanic here, and I am having issues with my people's car. My passat has 190k miles on it, and I recently had a coolant leak which required a coolant flange swap. After this I started getting p0302 and p0300 codes when first starting my car Edit: the misfire...

Okay- my daughter isn't shuddering and sputtering, her TSI is. It seem to happen irregularly. She took it to the dealership which told her she should run premium gas in it and charged her $300 for a fuel injector cleaning (and $50 to put in a half quart of oil). Problem was gone for a couple...

It is simple for those, who know. It may be helpful for everybody else. Video's link below. My car gave very good example of what I was talking in my videos about money. I would say it is MANDATORY to watch them in order to save hundreds and thousands of dollars(Euros, Rubles, Dinars, Pounds...

I guess this must be a jackpot of some sort? I have a 03 GLX 2.8 v6 ATQ 167500 miles and she's been running fine. Replaced plugs and coil about 20k ago. Driving home to Athens, Ga from Raleigh tonight my MIL light came on and I checked it with a cheap scanner I keep in the glove box. This...

Hello, I have a 2005 Passat 1.8l 123k miles that I get a flashing check engine light and a code P0302, Misfire on #2. I have Autolite plugs installed and regapped them to .032 today. I have replaced the fuel filter and fuel injector on #2 I have moved coils around and installed a new one on...

Can anybody help me with this????

First post. I searched these codes and got some good info, but wanted to ask a specific question. This is primarily my wife's car and am going by her descriptions of how it drove and behaved. She was out and about last week and said that the car was shuddering and bucking a bit, seemed like...

We have a 2006 Passat 2.0t with 120,000 miles. A couple of months ago codes P0300 and P0302 popped up. This happens on initial startup for the day. Not all days, it can go up to 3 to 4 days before it does it again. It is always logged between 30 and 40 seconds after startup and you can feel a...

Hi, I was idling when my '99 passat 1.8T started shaking and the CEL was flashing. I was able to limp it a quarter mile home, but it was very weak and when I got out of the car, there was a strong burning smell. I have checked the engine codes and they were: Address 01: Engine Labels...

Hello, I took few days off for the holidays and I've been driving my wife's car. Today when I took mine for a small Xmas errand it had a rough start, rough idling. It's not overly cold 36F outside, must be 40F in my garage. I during the rough idling the engine light intermittently turned on...

Vehicle info: 2002 VW-Passat AWM Motor Auto Trans 135k miles Vehicle is bone stock so no aftermarket mods of any sort, symptoms: partial throttle no symptoms present, full throttle: p0302 with a flashing CEL Code SET p0171 Pending code recent maintanance: New spark plugs/ coil packs...

B5.5 2004 VW Passat 1.8t FWD I was just crusing at 50mph in 5th gear when I lost significant power from the engine and got the EPC, traction control, and CEL all at the same time. Get it home tried cleaning the MAF, and deleted the codes by unplugging the battery. Note at this time I had not...

Three days ago 5 minutes after leaving the house on the way to work the engine stumbled for a few seconds and the CEL started flashing. Then the engine backfired and everything returned to normal. The light stopped flashing and the engine was smooth again. I drove home with no problems and used...

When I start my 2005 1.8T AWM engine from cold, about half the time there is a clear missfire with a flashing check engine which ultimately results in a P0302 code. The engine runs fine though after this first ~5 seconds. No loss in gas mileage or any other strange after effects. I researched...

I am getting a misfire code on cyl 2 and it lacks picpk up when starting from a dead stop and then sluggish afterwards. It idles fine in park or neutral I have replaced all of the coil packs, the fuel filter and I am still at a loss as to what I should attack next. It is getting extremely...

'98 1.8T 5spd manual AEB. Got flashing CEL, really rough. Code P0302. Didn't do anything to it, but tried starting it again a few hours later and the CEL was solid (not flashing), and ran normal. Cleared the code. Drove it for a day - no problemo. Today - flashing CEL is back. Guessing...

Have a pending P0171. Have replaced the MAF sensor and it fixed the rough idle problem. Would vary from 700 to around 1200 rpm. Still have pending P0171. Replaced one vacuum hose and looking into the others. Have a question. Does anyone have a OBDII scanner that can read the long term fuel trim...

Got this code last week when engine light came on. Changed all spark plugs and #2 coil. Reset code and no problems for a whole week until this AM and light back on with same P0302 code. What should I check next?

Started getting P0302 code about 1 week ago. Changed all spark plugs and #2 coil wire and reset code. Drives fine all week long and this AM engine light back on with same code?? What should I check next?

I have a 1998 Passat with a 1.8T AEB engine and it keeps throwing the code P0302 - cylinder 2 misfire. Things I have already done: 1. Installed new coil pack on #2 2. Swapped new #2 coil pack with #3 to see if code changed 3. Swapped #2 and #3 fuel injectors to see if code would change 4...