Search Results for ‘order’

I have a 2000 Passat GLS (ATW) with 167k miles. When I first try to start the vehicle it cranks but does not even attempt to turn over as if it's getting no fire or fuel. Sometimes if I wait for a minute it will start. Most of the time I'll have to wait for about an hour and then it will start...

ok here is the situation. I rebuilt my 2001 passat GLX 2.8l v6 DOHC engine. it runs good at higher RPMS. yet when idling it sucks can barely keep it running. code it gives 16684-85-86 and 89. which are random misfire, #1, #5 and #2 misfires detected. also I get mas air flow signal to...

Hi guys. I had bent valves on my AWM 1.8T head, so had a local machine shop rebuild the head. The cost ended up being very close to the cost of a remanufactured head sold by Rock Auto. Looks like a decent deal at $1400, compared to the VW price of $2200. Looks like the Rock Auto offering has...

Greetings everyone! Wondering where you all order parts when you need them? I used to go thru FCP Euro, but *man* are they getting expensive. Example, I need two front axle assemblies, and FCP wants $344/each! Front Left Front Right Sometimes I can find pretty decent parts on Amazon as...

I am redoing everything on my front end: control arms, brakes, axles(everything except TRE's). I am trying to figure out the best way to go about the process. I have done all these jobs individually, just never at once. Unfortunately, I had already removed shock/upper c-arm assembly by the...

http://i.imgur.com/mldx0Bh.png A friend gave me an old set of Audi rims for me to put on my 99 Passat since mine are garbage and need tossed. I entered the old and new rim info into a calculator and this was the result. So if i am reading this right, I will just need to purchase 20mm spacers...

I am trying to replace the coil pack on cylinder 2, only problem is I don't know which cylinder # 2 is. Can someone help?

http://forum.e46fanatics.com/showthread.php?t=1016574 I every once in a while we all need a good chuckle. I feel that OP delivers.... :rofl:

Hello fellows, I hope you can help me out with my suspension job, I'm placing an order @ FCP but I gotta make sure that all the parts I'll need for the job are in the same order due to shipping issues to me down here in Brazil. So far, these are the parts that I've put in my shopping cart: 1...

Window regulators for both front windows. New manual climate control cluster. Both windows are taped in place and the fan speed control switch is bad. Hopefully will have windows and AC/Heat again very soon. Shipping was a hustle, of course.

I am preparing to replace the front end upper and lower control arms along with both tie rod assemblies. In what order, should i remove and replace these components to make it as easy as possible? Remove all control arms then the tie rod assembly, then replace the tie rod assembly before...

Hello, I've ordered a couple parts and am going to go pick them up on Monday/Tuesday:wrench: The parts I ordered were coming from TEXAS and New Jersey. and were going to take 1 or two days total!! http://www.passatworld.com/forums/105-parts-sale/355283-vw-audi-clearance-sale-2.html Clearance...

Just curious if anyones bought these? I've been trying to find an OEM set but so far not much I see and the ones on ebay are way more then I'd want to pay, so the next option is the Depo ones? Just curious what the quality is like, and weather they will hold up? My stock ones the one side is...

Hey Folks, Just wanted to double check and make sure that this Volkswagen Passat B5 FWD 1.8T > Interior > Switches > Window > ES#1866567 Window Switch Assembly - 3591SWTN10202-1 is a good choice to order, Comes with removal tool and master data sheet, Just want a easy way to add aux, options...

I am thinking of doing a leak down test due to low compression pressure the test requires getting the piston of the cylinder under test to TDC in compression stroke, which is usually accomplished by tuning crankshaft bolt (on Tiptronic tranny). On 1.8T B5, crankshaft doesn't seem to be...

Last Wednesday 14th March 2012 at around 12:30 PM PST, I ordered the AUDITBKIT6 Timing Belt kit w/thermostat from Mike (ext.306) at FCPEuro. I received my order yesterday 22nd March 2012 at around 5 PM PST. Below are the contents: 1-TB Idler Roller: Brand=GMB, Made in Korea 1-TB Tensioner...

Germanfilters.com has been great in the past with fast shipping along with their low prices. I've placed three orders with them between 2006-2010 and never once had a problem. I finally got tired of trying to catch oil change specials with a decent filter at Autozone, so I placed an order with...