The battery in my car went dead and I had to replace it. I've had the car a few months and it had run fine previously and I had no fault lights on the dash at all. I had not yet driven the car after replacing the battery and was sitting in it and hit the park brake button (I had not tried to...

Hello, Firstly, I want to thank all of the veterans on this forum for all of the information you have provided. You are the true MVP's! I have been looking though a lot of posts, but nothing narrows down to exactly what I should try next. I have a 1999 1.8T AEB Passat with a high idle and...

This is my first time ever posting and I’m probably a novice at best when it comes to this kind of thing so I’m sorry if this is in the wrong place . I have a 2011 cc sport with the 2.0t Engine. I had been getting engine codes for Engine too Lean at idle and decided to replace the pcv/oil...

This is my first time ever posting and I’m probably a novice at best when it comes to this kind of thing so I’m sorry if this is in the wrong place . I have a 2011 cc sport with the 2.0t Engine. I had been getting engine codes for Engine too Lean at idle and decided to replace the pcv/oil...

I've lined up all marks and have had the valve covers off to verify timing between the cams by counting the links. EVERYthing was checked and rechecked several times before starting. The car runs but badly with misfire codes on cylinder 1/3/4/6. But nothing on 2/5. After it was running, I set...

.... and I don't care!! :) I dread the Passat doors, and only a regulator or regulator clip breaking would force me back in. Properly dealing with the water seal is the biggest bitch. I use that 3M strip caulk, which works great, but is horrible to manage. It's such weird behavior, it used...

i have a passat 1.8t 2003 model. i developed this problem when my timing belt snapped. i had to replace the belt. afterwards, the car would take multiple cranks before it starts. any suggestions. Also my windows work sometimes, when it does, it is flawless. but sometimes it would seem like there...

Hi all! I have a 2005 Passat wagon I bought last spring (90k on the clock). Since then, I have been battling with an endless limp mode struggle. I have made some ground on the limp mode and my car is somewhat driveable but the limp mode still rears it's ugly head about half the time I drive...

I love my Passat, but am continuously having problems arrise. Most recent being heater core going out. Water, steam..whatever..was apparently spraying under dash prior to it completely giving out. Subsequently, dash lights, speedometer, fuel gauge, nothing related works...could this be a wiring...

Hello PW I'm looking for the following items. Feel free to post shipped prices here, and I'm PayPal ready. Front cup holder (black) KHedges rear cup older (black) KHedges rear cup holder (gray) KHedges front headliner d/s pull handle (gray) PURCHASED single DIN center console...

I have a 2004 Passat Wagon 1.8 with 173K, I bought the car for $600.00 because it did not run. The owner said it overheated. After I got the head redone and installed I started it and white smoke bellowed out of the tailpipe. After about 5 minutes it stopped and the engine ran fine. The next day...

Ok guys, please help! My sons 04 Passat 1.8t manual transmission threw a bunch of codes today. It has about 186k mikes on it and ran great from when we bought it in September till this morning. We had the coolant flushed and changed along with a a cracked housing replaced about 6 weeks ago. But...

I was leaving Taco Bell yesterday with my meal and my EPC, Brake light and circled ! came on. The code read P0322, I cleared it and everything good. I drove to work this morning 20 minutes when I got off the highway and slowed down around bend car hesitated and EPC light came on with P0322...

I was driving down the road today in my 2000 Passat VR6 4motion. All of a sudden the engine shutdown. After a bunch of searching around I found that fuse 32 was blown, so I replaced it. AS soon as I turned on the ignition key on, it blew again. Did this twice. The owners manual labels 32 as...

The car will not start (no spark), no Cel, and the radio will not turn on. A check with a OBDII hand held shows a P0600 error and no other codes. The relays located in the computer housing are both Ok (they energize and the contacts close and open properly under a bench test), however the...

So recently I started getting a P0304 code. Had the plugs and the cylinder 4 coil changed. Ran fine for a day or two then the shaking came back. Went to autozone had the codes ran again. Now I have P0300, P0303 P0304, and P0299. Im not sure what plugs were put it. Not sure if it was the OEM...

This morning I replaced the coolant sensor of my '03 V6. Now I'm getting the following codes: P0101 Mass or volume air flow circuit range / performance P0300 random / multiple cylinder misfire P0301 cylinder 1 misfire P0302 cylinder 2 misfire P0303 cylinder 3 misfire P0304 cylinder 4 misfire...

Hello, I've recently started getting chk engine light and pulled these codes. P1114,P0456, P1326. My car Was chipped by APR about 3 years ago. Thought maybe my o2 sensor was going lazy with 125K on odo so replaced precat sensor to no avail. Anyone have similar situation? Your guidance and input...

2000 2.8 v6 awd, just replaced passenger side cat converter, both o2 sensors, and new cat back exhaust. New air filter also while air box was out. Check engine light for emissions and everything went away for 120 miles Then the emissions workshop light came on and the check engine light...