Search Results for ‘mass’

Hi all. Has anyone come across this fault code 00553 Mass Air Flow Sensor (G70): Implausible Signal (No dash warning light illuminated) I'm struggling with this one and could do with some advice.... My 2000 Vw Passat TDI (AFN) has lost all it's power, if i drive it with very small throttle...

My 2003 VW Passat 1.8T automatic is in limp mode so I've checked codes and it shows a P0102. I ran data on the MAF with code reader but it didn't register anything on code reader. I had issues with a bad relay so no power to MAF at one time so I want to rule out lack of current at wire harness...

ASAP Looking for a single-mass flywheel for a 1.8 Passat. I do not want a super-lightweight one, it must be at least 18lbs. Bonus if you have a pressure plate with it!

wifes B6 Passast just got the fault. I am able to disengage and engage the brake but it seems like it is only one side. replaced the switch. Will compensate.

Slow day at work today. I found this rather amazing and shocking at the same time. These cars look new!

VW Passat B5 engine does not run smooth Hello everyone. Been having issues with my passat, it does not run well, engine is rough and not smooth. Most visible at idle as it almost shakes. I checked the spark plugs but it seems all cylinders are working just fine. When scanning for codes I get...

Hi folks, For the life of me I can't find where the MAF is located for 2008 VW passat turbo. Anyone can point me to the right direction or any diagram would be greatly appreciated. Thanks.

Hello All. Just a reminder to check your mass air flow sensor when your car is running rough. She is running smooth as a kitten now. Hmmm. Anybody need a passat wagon v6 standard? pm me

I need a new one and just pain advance auto parts 185.10. It's a BWD. Can you guys recommend something cheaper but if the same quality?

So, it looks like Valeo is now making a single mass flywheel and clutch conversion kit for the 2.8 V6!! This could be Very interesting! From what I can tell there are no spacers required, does anyone have any info on this kit? However, nobody has them in stock yet. (well, none of the reliable...

hi i have a 2 litre passat b6 and was having problems with the gear box in 2nd and 4th gears on deceloration i would get a crunching grinding noise and in 5th gear i would get a whining noise 1st 3rd and 6th where fine so i took it to the garage and had the gearbox repaired under warrenty while...

Hi guys got a problem with eratic tick over and when I unplug the maf sensor car runs fine so I ordered a new one from my local dealer and put it on and its worse than before but this time the engine just cuts out and ive noticed in the end of the air intake pipe that goes on the end of the...

I'm taking a poll here. For the folks who have converted from dual mass to a single mass flywheel, what are your thoughts, results, regrets? My '04 needs a new clutch post haste and I'm really leaning towards a conversion kit.

Hi, my wifes 2010 1.6TDI CAYC Passat has started vibrating when accelerating through 1st & 2nd gear and slightly at Idle, took it to a garage(not VW) they reckon it's the DMF it has 110K miles on it. The garage recommended taking it to a VW garage to get it diagnosed and repaired as only VW...

Anybody around the southern Wisconsin or northern Illinois know of a shop that can resurface my dual mass flywheel?

HI Guys, Looking for some help with finding a decent shop in Central Mass my daughters 2002 Passat 4 Motion GLX v6 a local shop took a look and said he would recommend bringing it to a VW dealer or sell it. History of the issue many months of the follow P0300 Multi Misfires P0301 Misfire...

HI Guys, Looking for some help with finding a decent shop in Central Mass my daughters 2002 Passat 4 Motion GLX v6 a local shop took a look and said he would recommend bringing it to a VW dealer or sell it. History of the issue many months of the follow P0300 Multi Misfires P0301 Misfire...

HI Guys, Looking for some help with finding a decent shop in Central Mass my daughters 2002 Passat 4 Motion GLX v6 a local shop took a look and said he would recommend bringing it to a VW dealer or sell it. History of the issue many months of the follow P0300 Multi Misfires P0301...

Hi from central mass. i have a 2002 GLX 4 Motion for my daughters first car ... have had a few issues looking for a good mechanic in mass to help with a constant misfire issue.. Thanks in advance Charlie