manifold

My passat has a turbo underboost code and before changing the turbo I was inspecting all the lines. I noticed that there was an elbow completely missing that looks pretty important. It goes into the engine right near where the oil dipstick tube is. I have no idea what the purpose of the elbow...

Hello, Trying to build my 1.9TDI on a budget , just wondering what cars can i pull the turbo from? I guess i could weld a new exhaust manifold flange. Also wondering what car could i pull the fuel injection system from ( pumpe duse ). I have heard you can pull one of the turbos from an Audi A8...

I just replaced the passengers head, runs great. I know I torqued the manifold bolts, it was in my lap when I did it, I just popped off the heat shield and still feel no air from the manifold. Is there something disconnected buy the pump I hear when I start the car? Or vacuum line nit closing a...

Well the T (19 in the pic) junction broke on the Intake maifold side and threw a CEL light(0300) not to mention dropped idle RPM’s as well as giving it a rough idle. I made a temporary fix but need a replacement anyone know where I can get one or is it something I need to source from a hardware...

While replacing my intake manifold gaskets on my 2004 Passat 2.8 v6, I noticed a white plastic cone shape piece inserted into a blank hole in the intake. It appears to line up with a smaller hole where it seats. Is this simply a guide pin for installation? And is it necessary to put it back in...

Hello all new to VW for the most part and new to this forum. I was doing a oil change ( 2nd time ) and I noticed a open plug hole / hose fitting hole on the intake I will try and post pics , its right next to the air box on part of the manifold , I do not see any hoses that are off and the car...

Mirror Polished 1.8t AEB Intake Manifold DM if interested Asking $180 Plus S&H

We've partnered with HPA Motorsports to make your winter build a whole lot cooler, and we're giving away some epic parts to do that. This could be yours. For FREE. Seriously Free no strings attached....well a few... you have to play along. "THE RULES" Before Friday, December 8th, 2017...

You know the saying a picture's worth a thousand words? Well here's one. This is the connector at the bottom of the equation, and as you can see, it's very clogged. There is no way that changing everything above it would help with the pressures if you didn't change this guy. It's definitely...

Ok, did a thorough search in here and also on Google, oemepc, (Chilton's is worthless) and I really can't come up with something pertinent. I do beg for a little information on reinstalling the exhaust manifolds (easy thing in itself). As I lowered Bank2 manifold (driver side) over the coppered...

The old 2004 is now past 164,000km and now the O-ring seal on the breather tube above the oil filter housing is leaking. Not really a bad leak, but you know.:nervous: I know the tube will fracture when I try to remove it, no biggie, but I read that getting the new one in with the new O-ring is...

I have been working on my 01 4 motion Brake system. I am having a wierd issue with my brakes. At slow speeds it feels like the brakes are manual, not power and sometimes it seems like it isn't going to stop. Also has a hard brake pedal. Normal driving at regular speeds they seem fine. I have a...

-- Full Techtonics Stainless Exhaust w/ custom downpipe for GT2871r w/ vband application, includes spare wideband O2 bung for senors -- $500.00 + Shipping -- Neuspeed Short Throw Shifter manual -- $120.00 + shipping -- ATP Exhaust Manifold w/ block off plate for internally wastegated...

hi, iam searching to upgrade my k03 on my 97 passat. im trying to find a seller who will offer a k04 turbo + manifold and a downpipe thats all bolt on. can you help me find thoe components on ebay maybe?

Hi all, I new to the site. Could anyone tell me if my map sensor was faulty would my Passat be going into limp mode.. I got a remap done on my Passat, the guy ran a dynastic on it and a fault showed up saying map sensor. Just a small bit confused on this one. Anyone's help would be appreciated...

This isn't my photo, but it's the best one I can find... Imgur: The most awesome images on the Internet I have a 2002 1.8t - I did a boost leak test and discovered this highlighted t-shaped area is leaking - anyone know what part number it is? Is the whole assembly available somewhere?

Hello Everyone! A week or so ago I posted on here that my daughter's 01 Passat GLS 1.8t (AUG) lost all of its coolant, again. I found the source, and it was a rupture in the coolant return line from the turbocharger. So, I have pulled the entire front end off the car to make for slightly...

Hello everyone. I tried yesterday to remove my intake manifold to replace my valve cover. It looks like I need to take the front end off, but I tried that and it was taking too long and I'd still need to take off the radiator to reach the forward bolts. I tried taking the front end off this...

My exhaust manifold has a dent, pressure is coming out through that dent. Should I change it for the ATP Turbo Manifold or de Kinetic that sells CTS Turbo? Thanks! Also, any Intake Manifold upgrades out there? I just found the SEM and I don't think it's worthless 700 bucks for a K04. Thanks!

While working on my 1.8T AWM I noticed a broken hose. Tried to take a picture of it but my phone can't see that far in. Best way to eyeball it is crouched down in front, looking over the alternator and under the manifold. It's just to the left of, and slightly behind the crankcase dipstick...