Volkswagen Passat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 96 Results
  1. Volkswagen Passat B5 Discussion
    HELP! I am getting a MIL and 17927 code "Camshaft Adjustment, Bank 1 Malfunction - Sporadic" after replacing both cam chain tensioners on my 2003 V6 (I had a broken pad on one side, and given the mileage I decided to replace them both). To do this job, I removed both cams on both sides, along...
  2. Volkswagen Passat B7 Discussion
    Hi, the wastegate on the turbo for my 2016 Passat R-line wont open on the Charge Air Pressure Actuator. It only clicks and heats up when the key is turned to "ON". Any idea as to why that happens and how to fix it.
  3. Volkswagen Passat B5 Discussion
    Hello guys! So over the past 3 weeks my 2004 Passat has had a STOP, BRAKE MALFUNCTION, CONSULT OWNERS MANUAL message appear up on the dash 3 times sporadically. The first time it happened, I had been drifting in a empty snow filled parking lot, and it came on after a solid 5-10 min. I chalked...
  4. Volkswagen Passat B5 Discussion
    Today I took my B5.5 for a tire change. Two weeks ago the car was tuned-up and had an oil change. Everything fine, smooth and excellent fuel mileage (30.1 mpg). Suddenly the car began with a misfire when the installer handed me the car. I asked him, WTF?? The obvious answer you might guess "oh...
  5. Volkswagen Passat B5 Discussion
    Hi guys, I did some research on this issue and still need some help. I get the p0010 camshaft position actuator a bank 1, circuit malfunction. So, I figured it may be an 'electrical issue' of some sort. I changed the camshaft position sensor and still doesn't work. I read to test the solenoid...
  6. Volkswagen Passat B5 Discussion
    I had the HVAC fan motor out yesterday because it started to squeak a bit, and in the process found the flap location for cabin recirculation. The cabin recirculation flap does this (see vid) when recirculate is off. It makes noise that is rather annoying when it partially opens / closes when...
  7. Volkswagen Passat B5 Discussion
    Just got this code after finally fixing the airbag code. 17094 Transmission Fluid Temp Sensor (G93) Malfunction When cleared it comes right back. Researched it and only found out the sensor is in the harness. I was working on the passenger seat to fix the airbag fault. Is it possible...
  8. New Member Introductions
    I started my 2012 Passat SE this morning and scraped the frost off the windshield and cleaned beneath the wipers. I then got back in the car and tried to activate the windshield wipers, but they would not work. Any suggestions on a quick fix or where to check first? Thanks!
  9. Volkswagen Passat B5 Discussion
    I am getting error code 352 witch relates to the ign. coil circuit malfunction. Anyone else have this problem before? I have a 04 glx fwd with v6 and manual. The car would be running fine for a while then it will start to misfire and the check engine light will start to flash, will last for a...
  10. Volkswagen Passat B6 Discussion
    Hello, I hope someone can help. This is my 1st post so please bare with me. I have a 2006 1.9 TDI 3C2 Passat with Climate Control. On a warm day the cabin temp builds up and when I start the car and turn on the climate control and set it to 22 degrees I can hear the fan going full blast but no...
  11. B5 Garage
    So I love my Passat, but lately it has had a lot of issues and I am trying to decide whether it’s best to get a newer car, or make the repairs. It’s a 2001 VW Passat V6 with 181k miles. Today I started to drive and my vehicle was not able to get over 1000 RPMs without starting to die. Although...
  12. New Member Introductions
    After first few weeks found that my right mirror not going down when I backing up. Same time I have no problem to adjust the mirror using the joisting - so it was not frozen, then all of sudden it starts working and then after week or so stopped again. IT works this week but I don't know for how...
  13. Volkswagen Passat B5 Discussion
    Hello all, I just got this code on my car and after plugging it in with a generic computer , it seems like it's the oxygen sensor that is starting to go bad I guess. Is this something I can change myself ( buy part online from reliable seller ) What is the experience or do I need to bring it...
  14. Volkswagen Passat B5 Discussion
    Hi. My left tail light recently stopped working. Naturally I suspected the bulb to be broken but it wasn't (I even tried with the right side bulb) I have now measured that the +12V for the tail light (position light) is constant 0V. All other bulbs are working properly on both left and right...
  15. Volkswagen Passat B5 Discussion
    I have been using this thread for months now to solve problems that I encounter. After searching extensively on this forum and others I finally broke down and joined so I could ask the question myself. The air conditioning on my Passat lately has been less than stellar. The air usually starts...
  16. Volkswagen Passat B5 Discussion
    Finally I think I can put this post to bed . After several weeks of chasing this headache this annoying problem is finally over. I originally posted of having no DRL & turn signal on the "right" side . Flashers were ok all around, high beam & fogs all ok. After reading many posts here, the...
  17. B5 Garage
    Hey guys, DIY'er here. I replaced the timing belt using a Blau kit (it went great with the kit). However, I'm getting these two codes that were not there previous to the timing belt. Codes are at very bottom. O2 Lamda: Correction behind catalyst and Camshaft Adjustment Bank 2 Malfunction...
  18. B6 Garage
    Sorry if this was posted somewhere else, but I've looked for two days and not found this specific issue. My 2006 3.6 had four or five LEDs out on both tailights on the bottom. I bought new Depo tail lights and installed them Saturday. The tail lights, brake lights and turn signals all work...
  19. B5 Garage
    Hello, My gas door will not open. I was able to gain access and remove the actuator. I unplugged it and checked the movement of the plunger and it moves in and out freely. I have 12 volts at the plug when the switch is activated. When I plug the actuator in however it seems to have resistance...
  20. New Member Introductions
    I was driving my 2008 Passat 2.0 T on the highway (I-20) and I had to get infront of the car infront of me so I accelerated which led my RPM to rise to about 4,000. At that moment, the malfunction light blinked a few times and I could feel the car was shaking (not the body itself but I could...
1-20 of 96 Results
Top