Search Results for ‘inner’

Audi cross poster here. I have a 2000 A4 Quattro with manual transmission, 2.8 liter V6 ATQ engine. The outer front CV boot is torn and needs to be replaced. My Haynes manual says the inner CV joint flange bolts are either M8 or M10. It doesn't specify what type of bolt they are. When I run...

Hello, I'm looking for all 3 sets of door handles (the ones you pull to close from the inside). They can be grey or black don't matter. Thanks B5.5

I'm about to replace CV boots on DS. My Bentley manual says to "coat sealing surface with D-3" for the inner boot. I have standard inner cv joint on 99 AEB 5-spd. Any ideas what the D-3 stuff is? Thanks for any help.

Hello all, can anyone confirm the size of the inner tie rod on the 2000 Passat? I need to get a wrench and have seen a couple of different sizes listed. Also, Crows foot or Combo. Whats better for the job? Thanks for the input.

Is there any way to repair the threads in the cam shaft for the camshaft timing pulley bolt? Not sure why it stripped so easy but i almost cried when my torque wrench turned on around and no click from the wrench. Any suggestion besides replacing the cam? 2003, 2.8 V6

I HAVE THE ENTIRE ASSEMBLE, OUTTER AND INNER TIE ROD, JUST WANTED TO KNOW IF ANYONE HAS ANY TIPS FOR ME. OR LINKS WITH HOW TO'S OR ANYONE IN THE NY AREA WHO KNOWS WILLING TO GIVE A HELPING HAND IN THE QUEENS AREA...I WILL BE CONDUCTING SET VOYAGE TOMORROW, SUNDAY, 6/30/2013 AROUND MID-DAY IF YOU...

Hi I set about fitting a detachable tow-ball towbar to my car yesterday and all went well with the rear bumper removal and the installation of the new bar but I am stuck trying to remove the boot (trunk) inner side trim panels to allow me to wire it in. I have managed to remove some but I am...

Hi all... Without reliving all the painful details, I was installing coilovers on my 2013 TDI with 3900 miles on it. Everything was going as planned until I unbolted the strut tower on the drivers side and the spindle fell down too far, pulling the inner cv joint apart. I lined everything back...

Moved post to the TDI Forum...

I replaced my B5 with a 2009 B6 wagon and I'm puzzled by the inner tail-lights. The center is obviously the reverse light but what is the ring of LEDs around the perimeter for? I can't find any switch or level which enables these LEDs, not the brakes, not the running lights, not the turn...

Just a quick question before i hit the buy button. Is ...THIS... the right size for the inner drive shaft bolts?

I was changing my passenger side headlight bulb last night and while trying to undo the twist-lock, the inner part of the headlight fixture started swinging back-and-forth from the top. it's like it has a hinge in the top. I can't seem to see what's happened and I hope it hasn't broken...

My rear left window cable was all tweaked so I was able to get the whole inner door panel to replace but I need a few tips. If anyone has a few pointers to removing the okd one and installing the other one that woukd be great. I dont want to hurt anything in the process. Id like to have a...

After many questions on getting the inner rings for a affordable price With these you will need to MOD your own inner tail lights (its fairly easy i did it myself in less then an hour) Here is my little DIY with pictures and ect on what you can do and what needs to be done: VWVortex.com -...

Does anyone know the size of the inner tie rod? I am trying to locate the correct sized attachment for the inner tie rod tool. Autozone said it was an off size and their tool isn't applicable. thanks

Hello. I need the grab handles for an 02 Passat. I need the one for the rear passenger side. The base and the cover of it. Doesn't matter what color, I can paint it, Shipped to 33122. I need to take my car to revision soon, someone please! :bowdown:

Well, as most of you know, lowering a multilink suspension car like the Passat and all Audi's ( B5 and after), you already know inner tread-wear comes with the territory. I did get 12,000 miles out of my A5 after the Ohlin SL's were installed, and lowering my car about 1". This past Tuesday, I...

Hey. I am looking at replacing an axle assembly / half-shaft on my early-2001 manual AUG 1.8t passat. The car has axle assemblies without the tripod inner joint. Is there a way to upgrade to the later, tripod inner joint design? TIA

What kind of crimp too do you guys use to secure these clamps into place? Thanks.

Hey Y'all, I got time to pull the inner side off my back passenger's door to find out why the road noise is very loud and the car is very drafty. Well, there isn't anything in it. It looks like more then half of the stuff that Should be in there isn't. This is after I paid over $1,600.00...