Volkswagen Passat Forum banner
inlet
1-20 of 109 Results
Advanced
  1. Volkswagen Passat B5 Discussion
    The inlet of my heater core (2000 B5 GLS V6, automatic) is cracked and has steam and coolant shooting out of it when the car gets up to temperature. Is there a fix that any one that works on this plastic - I can tell you it's not JB Weld! Yes, I could bypass the core altogether until the...
  2. B5 Garage
    I've been leaking coolant ever since I had a service done a couple of years ago. I had checked all around the engine and all hoses are newish (the car had new heads and timing belt done about 60K ago) to no avail. Finally, I got under the battery cover and saw some coolant. Great. :cry: The...
  3. Vendor Marketplace
    Click HERE to order or for more information. VW B5 Passat 1.8T Forge Turbo Inlet Hose Kit - Only $166.50 Shipped! If you're running more boost than your stock hose can handle, Forge has your replacement. The thick silicone rubber Turbo Inlet Hose is reinforced with nylon cording to provide...
  4. Volkswagen Passat B5 Discussion
    The underside of my turbo inlet pipe (and dripping onto the turbo outlet) is coated in wet oil. The turbo oil lines look dry. Where is this oil coming from? Not really wanting to go into service position to find out.
  5. Parts For Sale
    Cleaning up my engine bay. 124,000 miles on all parts off an 01 AUG engine. SAI pump SOLD Combi valve (06B131101) for AUG /AWM $50 shipped Hard lines (06B103213 and 058133607) $15 ea Turbo inlet $15
  6. WTB/WTT Section
    Looking for a 2 1/2 or 3 inch turbo inlet pipe. Lmk what you got
  7. B5 Garage
    I've been reading some oil is ok a lot is not. However its never clear what the cause of a lot of oil here is. So the question would be what causes this? I'm thinking some part of the PCV system maybe the puck valve? Car/backround: 2004 Passat 1.8t FWD 5 speed manual 59,300 miles Stock aside...
  8. Vendor Marketplace
    Click HERE to order or for more information. VW B5 Passat 1.8T Turbo Inlet Hose Kit - $166.50 Shipped! If you're running more boost than your stock hose can handle, Forge has your replacement. The thick silicone rubber Turbo Inlet Hose is reinforced with nylon cording to provide stability and...
  9. B5 Garage
    Hi everyone, I was removing the inlet hose to do a Heater Core flush when the inlet nipple of the Heater Core partially broke off. I check to see if there are any cracks leading back to the Heater Core and found none. Other than the part that broke off, the rest of the nipple and pipe seems...
  10. B5 Garage
    While tracking down various coolant leaks, I discovered a leak at the heater core inlet pipe. It is not visible, but a pressure test caused a stream of coolant to pour out. Since the inlet pipe is longer than the return pipe, the hose does not cover the length of the pipe, for whatever reason...
  11. Volkswagen Passat B5 Discussion
    Hi all, Just a quick question here; I'm looking to purchasing a new muffler for my 2003 (b5.5) 1.8t passat, since I just deleted my res. I just need to know the inlet size for the muffler I need. any help? Thank you in advance!:thumbup:
  12. B5 Garage
    I have been getting 313 error code for my 02 Passat which is fresh air inlet sensor for my climatronic. I ordered sensor whose part # starts with 4A0...i took my glove box out and reached up and found a sensor which looked slightly different. Its part # starts with 1J0... since i did not have...
  13. B5 Garage
    This is the turbo inlet pipe i want to install but it doesnt have a port hole up top near the airbox hole heres a pic of the factory pipe with this vaccum line? theres no hole on the after market to plug it in to? Does this pipe not work? or do i block off the line? Thanks for looking!
  14. WTB/WTT Section
    Potentially in the market for a beefier turbo inlet pipe, and potentially a chipped awm ecu . Will post ecu part number in the morning. 02 1.8t 5 speed Sent from AutoGuide.com Free App
  15. B5 Garage
    I saw that thw evo racewerks inlet pipe looks like it would flex the least sne its aluminum. And also has a larger inside diameter. But my question is does this heat up more then the silicone inlets from apr, forge or samco? I'm just trying to get the best posible outcome besides going to...
  16. B5 Garage
    I have a 99 AEB and am trying to find details on how to replace the turbo inlet hose. If someone can help me find a threads. I am sure there is one in here just can't figure out the correct combinations of words to find the thread. Also, will just be using the stock VW hose. Not interested...
  17. B5 Garage
    I am getting a 313 error code on my Climatronic System and need to replace this temperature sensor. I have read it's somewhere under the cabin filter and behind the glove box but I'm not sure what it looks like. Are there any picture available that I can use to help me remove this sensor? Thanks!
  18. WTB/WTT Section
    I just picked up a 2002 W8 sedan and am dying to get it on the road. The PO must have had a shotty mechanic and he stripped all the intake inlet mani bolts so I need all new/used ones. here's a pic of what I need: I also need: -plastic engine cover -hood strut -CCM -radio fader knob, it can...
  19. B5 Garage
    I have a small hairline crack on plastic pipe that comes from heater core through firewall causing coolant leak. Sometimes lots of coolant sometimes a little depends on outside temperature I think. I was wondering if cut off the hairline crack which should leave me plenty of good meat to connect...
  20. Parts For Sale
    I have a black APR Turbo Inlet Pipe for sale...in great condition but used obviously. Got some good gains on this with a chip, intake and exhaust already. These go for $190 new...I'll sell for $100 shipped. Thanks.
1-20 of 109 Results
Top