Search Results for ‘heads’

While on a long drive the car EPC turned on, car lost power. So initially I thought the problem was the ignition coils and spark plugs, since I was getting misfire codes, and thats exactly what it felt like, I changed those and was still dealing with misfire issues and symptoms. I went ahead and...

I've been away from the forum for awhile, chasing issues on other vehicles. Now it is time to address the 2004 Passat 1.8L which lost a timing belt on the highway because I didn't replace the water pump when I installed the timing belt the last time. Idiot..... So I'm in the process of removing...

B5.5 coolant issue We have a b5 passat 2000 with an inline 4. There is a plastic coupling that blew out of a*valve*with 2*wire harness*plug ins located on the firewall or rear side of the engine*block. We put a new coupling in it also blew out so we put zip ties around it and the*sensor*next to...

I have an AWM Turbo head for sale I just pulled off a running engine. It had spun a rod bearing, destroying the crank and rod, but was still running without even a cel showing. $250 shipped or $200 picked up(13815 zip code,central NY State). I also have an AEB head with several bent valves. $150...

I have 2 2002 Passat GLX, one sedan, one 4 Motion wagon. The 4 Motion just turned 200,000, the sedan has 157,477. I'll pull the heads before they goe to the crusher. Located in Norwich, NY 13815. $125 per head picked up. Willing to meet a reasonable distance. Both cars start and run, no bent valves.

I have a pair of heads on a Passat B5.5 for sale. The transmission went, and I am parting the car out. Engine ran excellent, never any timing belt, or oil problems. 189,000 miles on the car. Have many other parts from the same car(sedan, GLX). $100 each plus shipping. Located in Central NY State...

I recently purchased a 01 B5 from my sister to help her out. The car showed a check engine light, then a few hours later, died. Upon inspection I realized the timing belt had broken (missing teeth). The car sat and battery died so i never was able to pull the codes. I took it to a local shop. I...

99V6 AHA engine. A local automotive machine shop rebuild 2 heads for approximately $650 plus tax. This includes six new intake valves, new exhaust valve guides, and a rework of all the remaining valves. On the other hand, a breakers yard can provide 2 new to me heads for approximately $375 plus...

Bought a 2000, B5, 2.8LV6 Tip, 115k miles with some mechanical issues. It seems Bank 1 CCT shoes failed, causing the chain to jump and it appears there are some bent intake valves. There is zero compression on cylinders 1, 2, 3. While the head is out, should the shoes on the other CCT be...

I have a 2000 Passat with the 1.8T engine code ATW, the timing belt stripped some teeth and everybody knows what happens then. I was wondering what other heads would be a direct fit for that engine like what year and model and engine size and engine code. I'm planning on going to a junk yard...

VW 4.0 W8 Passat Cylinder Heads, right and left sides available. ASKING $800 for each Cylinder Head OBO! Good Condition Used Operational Cylinder Heads for W8 4.0 Liter VW Engine Cylinder Heads came off a running engine Fits any W8 Engine No Returns Please contact George at 262-271-4456 to make...

Hi all, Well, as my AEB hasn't decided to give me trouble in a while, I've undertaken another project. A 2003 2.8 ATQ. The timing belt idler pulley came apart while on the freeway. The belt had around 80k on it, but who knows if the previous belt change included everything as it should have...

I know this isn't the WTB section, but honestly - does anyone ever look there? The classifieds had nothing too, so here it is. I am helping a neighbor (very underfunded) to fix his Passat following a timing belt break. While we can rebuild his heads no problem, I was wondering if someone might...

I have plenty of parts left from all of the cars I had to get rid of before moving. I will list what's left as I have organized now, and add to it over the next night or two. B5 1999 Passat 30V V6 - Two Cylinder Heads -willing to neg. Intake Manifold - same on neg. 2 Throttle Bodies MKIII...

any one around my way? would like to know im not the only PASSAT lover round here lol Thanks Devin

How can I check if there is oil pooling in the cylinder heads? Thanks in advance.

I finally got the heads of off my 2002 ATQ after a loss of timing belt tension incident. I'm about to send the heads to a local machine shop for rebuild. The machine shop offers to remove and re-install the camshaft as part of their service. I'm leaning towards doing it myself so I can ensure...