Volkswagen Passat Forum banner
hardware
1-20 of 60 Results
  1. Volkswagen Passat B5 Discussion
    Hello PassatWorld! It has been a while and I'm putting my B5 back on the road. I was hoping that someone would be able to help shed some light on the headlight mounting hardware for our B5s. I was able to find the B5 headlight screw (N90732301) while searching through the VW parts website. I...
  2. Volkswagen Passat B5 Discussion
    I have a donor car with 'ASR' button. What constitutes ASR hardware (except obviously a button and a harness)? Is it different ABS controller? Some sensor? I want to transfer it to a car without ASR.
  3. Mobile Electronics
    Hi, I've seen very cheap dealextreme.com devices that connect to mobile via WIFI or Bluetooth I was looking for opinions and experiences befory try one. I have a VW Passat CC, and just need something cheap, able to do diagnosis and to reset the fault diagnosis using my mobile...
  4. Vehicles For Sale
    I have a 2005 VW Passat Automatic transmission with 1.8T engine with K04 Turbo installed. It is a GLS with leather seats and the montreal 17 inch rims It is also chipped with the GIAC software loaded. The car has 207K miles, runs great but needs a new water pump and timing belt. The interior...
  5. B5 Garage
    So I'm changing out my outer belts and I stripped the first bolt I tried in the a/c tensioner. So I'll have to vice-grip/heat/curse it out. :banghead: But before I do that, I'll need a replacement bolt, but I can't I.D. it. It's the first allen head bolt coming up from the bottom. The easiest...
  6. Parts For Sale
    brand new, never used complete kit with floor screws and round retaining hardware. asking $9 plus shipping. same kit is $18 new @ ECS tuning. part number is shown on the bag which contains the installation instructions. thanks for taking a look and let anyone you know who may be looking for...
  7. WTB/WTT Section
    PM me what you have. Thank you
  8. Parts For Sale
    FS: Votex luggage basket - no mounting hardware - $30 + shipping (or offer) As listed, Votex luggage basket...here's the problem: it doesn't include what you need to mount it. Probably a 7/10 cosmetically, but it's all there and fully functional. I wrote about what's needed to get it installed...
  9. Parts For Sale
    Hey guys, I have a set of 5x112 20mm spacers that I was going to run but I need a different size. These are in great shape and include BALL seat extended lugs so you can keep your stance over winter or if you just need to space out stock wheels or any ball seat wheel. Located in Lancaster, PA...
  10. Volkswagen Passat B5 Discussion
    Does anybody know where I can purchase hardware for lower engine cover cheap? Dealership wants $80.00:crazy:
  11. Volkswagen Passat B5 Discussion
    Forgot where this strange bolt goes back onto. Somewhere on front clip, bumper. Can someone point me to the proper location?
  12. WTB/WTT Section
    Hoping some of you Thor converts still have your old hardware. Looking for all of the pins and all of the pin retainers. If you have a rear bracket, that would be icing on the cake. Shipping to 53214.
  13. Wheel and Tire Forum
    Please forgive my ignorance and newb question: I ordered a set of TSW Rivage 18x8 from Discount Tire but I did not go for the optional mounting hardware. So at the very least I may need hub rings, but I believe they come with the wheels. Is their wheel bolt kit necessary? What size/type socket...
  14. Volkswagen Passat B5 Discussion
    After the whole "we can't sell you the brake lines that fit your ECS BBK kit because you are not the original owner and we cannot verify your kit is one of ours" BS and attempted reaming without even a half-hearted reach around from ECS, there was NO EFFING WAY I was sending $120 to them for a...
  15. Parts For Sale
    For Sale are stock front caliper hardware kits (which include rubber bushings and caps and optional caliper springs) the brand of all parts are centric...they will fit front b5 passat calipers and also audi's a4 kit #1 (4)bushings and (4)caps-$12 shipped only 11 left (1st picture) if you want...
  16. Volkswagen Passat B5 Discussion
    I have to reattach my lower engine cover on my passat. What's being used to do this other than zip ties and the $150 set that the dealer is trying to sell me. My cover/shield dropped while I was running about 80 mph on the interstate. The shield is still in one piece although with another hole...
  17. Volkswagen Passat B5 Discussion
    I did a little searching but I didn't find what I was looking for. I plan on doing the A8 rotor and TT caliper carrier mod, but do I need to replace any of the caliper carrier hardware? And if yes with what? Thanks
  18. WTB/WTT Section
    Title says it all Prefer someplace close to dutchess county NY. In fact I need 2x of each for two separate vehicles. Need lower Foglite grilles one for each side for one of them too. By Skidplate I mean plastic OEM belly pan Don't ask it's a long story Kraut
  19. Volkswagen Passat B5 Discussion
    I just got my Thor skid plate and the hardware kit says it's for an A4. The listing of hardware pieces for both the A4 and B5 list different pieces. They are almost identical, but there are a few differences that come in each kit. Am I good to go with the A4 hardware kit or do I need to...
  20. Parts For Sale
    As the topic states, up for sale are a few things left over from my V6 Passat that I never used / installed. The first is a gasket set, which can be seen here: http://www.ecstuning.com/Volkswagen-Passat_B5-4_Motion-V6_30v/Engine/Gasket/ES259658/ I used one valve cover gasket from the kit, but...
1-20 of 60 Results
Top