Volkswagen Passat Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 132 Results
  1. Parts For Sale
    Found an old box of parts. Inside is a SPEC aluminum flywheel. Unsure on what model at this time. Found some markings that I am planning on contacting SPEC about. The good: an expensive upgrade could be yours for a reasonable price! In great condition minus the replaceable friction plate. The...
  2. WTB/WTT Section
    ASAP Looking for a single-mass flywheel for a 1.8 Passat. I do not want a super-lightweight one, it must be at least 18lbs. Bonus if you have a pressure plate with it!
  3. Parts For Sale
    RA4 clutch flywheel package $300 plus shipping: BNIB from ECS includes everything ECS includes in kit, save yourself $$$$ and buy this, won't find a new one cheaper This is everything you need to replace...
  4. New Member Introductions
    I recently had a transmission go out in my Passat. I took off the subframe, starter, pulled the tranny, and installed the new one. But when I pulled the old one the shim plate between the motor and transmission got bent badly enough around the starter that the torque converter bolts hit every...
  5. Parts For Sale
    A4LWFW AWE TUNING AUDI A4/VW PASSAT B5 ALUMINUM FLYWHEEL (97-> 5SP A4/B5 1.8T) Willing to ship at cost...
  6. Volkswagen Passat B5 Discussion
    2002 Passat Wagon 145000 miles 1.8T AWM auto. SO I bought this car this fall. and about 3000 rpm I hear this sheet metal rattle for a second and goes away.. most times at that rpm.. Unable to find the noise. So today I start it up as normal its 25deg f so i hear what i think is the...
  7. Volkswagen Passat B5 Discussion
    Hello All, I can't seem to make it past the three month mark (:banghead:) without posting some sort of car problem so here it is. I had a engine swap about 5,000 miles ago due to what I believe was a botched timing belt job, leading to timing belt failure and subsequent engine swap. This is an...
  8. Volkswagen Passat B5 Discussion
    Hi everyone.. i own a 2003 1.9 6speed passat, i need to replace my flywheel/clutch.. i was wonder would a flywheel from a 2002 1.9 6speed passat fit my car? or would it have to be from the same year? Thanks
  9. New Member Introductions
    Hi everyone.. i own a 2003 1.9 6speed passat, i need to replace my flywheel/clutch.. i was wonder would a flywheel from a 2002 1.9 6speed passat fit my car? or would it have to be from the same year? Thanks :)
  10. Volkswagen Passat B5 Discussion
    So, it looks like Valeo is now making a single mass flywheel and clutch conversion kit for the 2.8 V6!! This could be Very interesting! From what I can tell there are no spacers required, does anyone have any info on this kit? However, nobody has them in stock yet. (well, none of the reliable...
  11. B5 Garage
    Hi, Some months ago my 1999 Passat 1.9TDI Syncro started to make a "clunk" whenever i released the clutch, and this weekend the real problem occured. I can shift into whatever gear i want, and when i release the clutch i only get a low "scraping" noise from underneath the vehicle, like...
  12. Parts For Sale
    + + + + + s o l d + + + + +
  13. Volkswagen Passat B5 Discussion
    Hi all ive just got a 1.8t passat 1999 vreg APU engine code it needs a new clutch and dmf my friend has a engine with AGU for his golf and has a flywheel and im wonder if it will in mine as I can afford clutch but not dmf.
  14. Volkswagen Passat B5 Discussion
    I'm taking a poll here. For the folks who have converted from dual mass to a single mass flywheel, what are your thoughts, results, regrets? My '04 needs a new clutch post haste and I'm really leaning towards a conversion kit.
  15. Volkswagen Passat B6 Discussion
    Hi, my wifes 2010 1.6TDI CAYC Passat has started vibrating when accelerating through 1st & 2nd gear and slightly at Idle, took it to a garage(not VW) they reckon it's the DMF it has 110K miles on it. The garage recommended taking it to a VW garage to get it diagnosed and repaired as only VW...
  16. B5 Garage
    Anybody around the southern Wisconsin or northern Illinois know of a shop that can resurface my dual mass flywheel?
  17. Volkswagen Passat B6 Discussion
    Just had a new clutch installed from the dealership, here's what was installed: 0A5-141-671-F Bearing 06J-141-105-JX Clutch Kit 06J-105-266-H Flywheel The problem I'm having is that now my clutch is very hard to press in now, told the dealership and they are like"don't know...
  18. Parts For Sale
    SPEC 9lbs Alum Flywheel + SB clutch (For Rebuild) SOLD SOLD SPEC Aluminum Flywheel weighing 9lbs. Accept a sprung hub clutch disc. Fits front wheel drive and Quattro models. NEEDS NEW FRICTION SURFACE. You can not turn it down to resurface it. SPEC has these prices at $79 with new...
  19. Volkswagen Passat B5 Discussion
    Several months ago I had a Valeo solid flywheel clutch conversion kit installed on a 2000 1.8T and wanted to pass along my thoughts on it's performance vs. the OEM dual-mass flywheel (DMF). The vehicle had a noticeable torque induced vibration through the shifter that I suspected was failing CV...
1-19 of 132 Results