file

Address 01: Engine Labels: Redir Fail! Controller: 4B0 906 018 CM The unregistered VCDS Lite software doesn't have my ECU label on the Redir list. I searched for a compatible one to rename it to but couldn't find one even on the Ross-Tech site & they don't offer help on the free...

[SOLD] GIAC K04-15 Hammer File CM ECU from 2002 AWM SOLD! Going through my storage and found this ECU that I pulled from my 2002 1.8t 5 speed Passat before it got sent off to meet it's end. It is a CM code ECU with a GIAC Hammer file flashed on it. I recall some B5.5 Passats have issues...

Looking for a giac j31 for my atw ecu # 4b0 906 018bg..let me know if you have one for sale or one that is for sale..thank you

SOLD B5 1.8T AEB ECU w/ APR stg 1 catless file, $400 shipped SOLD ECU is a 557P model for an AEB motor (96-99 A4's, 98-99 Passat's). Solder on APR chip w/ ribbon cable port for future flashes (The only way to upgrade these boxes, no direct port) Its from a manual car, but can be coded with...

i am not sure where to post this, but i just had very bad experience with emich wolksvagen dealership, while i accompanied my firend who was byiing used car from them. just i know there is a website where you can file complain directly to vw, but cant find it anymore. i have always been vw fan...

Yes, I have a dash rattle and yes, I have started two threads about it. I know or think we are not supposed to start duplicate threads but I need to start again. I need to start again because I am still no closer to finding a solution or determining where the rattle is actually coming from...

Does anyone make a k03 MAF-less chip?

Hey... as the title states. I'm looking for a chip for my buddy. I know his budget and have cash in hand from him, so if we can figure something out that'd be great. I'm thinking maybe the Hammer file? Really though, interested in anything that will make a k04-015 run. I'm also looking for a...

Well well well.... I've been in touch with the folks at upsolute over an advanced boost file for my K04. They made one, but I am going to have to sacrifice my closed loop boost control and run an MBC. Anyone have any thoughts on the matter?

I have a few parts for K04 that will work on AEB engines... PC-16 file that is not soldered on to the ECU, you will have to find a place that will do it (not very hard to be quite honest) - $150 I also have 315cc injectors - $150 3bar FPR - sold or sell all together for $280 I also have the...

I cant find any 100% info on this? Whats power is this good for?

Hi all... I always like to share any info I get that could make or break a project, so here goes... I spoke with Chris at Revo yesterday on writing a program for the BT project I'll soon embark on (BT setup bought from one of our own here at PW). As I was giving him the rundown on my setup, he...

This is just a quick question/request, so I didn't see the need to soil our 7-thread dyno forum with it... It's as the title says..... I'm looking for Andy from Ross-tech 's dynoplot4.xls excel dyno chart, or whatever the latest iteration of it was. All the links to it on the various...

98 aeb m/t, I got the k04, getting a front mount in, what injectors and fpr are proven to work, along with anything else to make some power! thanks

For those of you that have had the ABS failure, file your NHTSA complaint. While it sounds trivial, it only took me 5 minutes, and if enough of us do it, we may see a recall (and get some $$ back). I thought this was bogus before, but I filed a complaint on my throttle position sensor on my...

going to get inthe next 3-4 weeks. what im trying to find out is what kind of mpg are you geting. i have a 99 aeb with tip 3 inch turbo back and light crack pully. just trying to get an idea :whistle:

i want to find a 2002 passat to read the info from his ccm (comfort module ). here is a the software to read . maybe this is a little difficult for the common users to do it. because you will have to use a serial port vagcom to read the info in dos system. this is really trouble to find an...

I dont have a owners manuel for my passat, any body no an online one that i can just browse from time to time?

what numbers should i expect at the wheels from the PC-16 file with all the nessecary hardware and everything involved?

Does the stock turbo inlet pipe or maybe the APR inlet pipe fit on the bigger MAF? How about fitting the bigger MAF in the stock air box? I know this won't work on my AEB :lol: I'm trying to figure out upgrades for an A4 wagon. What have you Hammer file guys done? TIA