Search Results for ‘feed’

Hey guys, im dealing with a very mild coolant leak and I believe I have tracked it down to this junction: CTS Flange-->Heater Hose Feed The connection is shown in this picture: http://lh3.ggpht.com/_O9RZSvIy6NU/TCq36l6K4NI/AAAAAAAAAPk/rXTDoZtl7E4/s800/IMG_4211.jpg Can anyone shed some insight...

Hey all, I recently acquired a '99 Passat 1.8T and need some good parts to get it on the road: Turbo Oil Return Line Turbo Coolant Line (The one that comes off the radiator pipe to the top of the turbo) Driver's Side Blinker/Corner Light (Next to the headlamp) Please let me know if you have...

just wanted to follow the trend & create my own build thread & see the before & after shots , also receive some great feedback good & bad ofcourse ;) well it started in 2009 when we decided to look for a 2nd car , after wanting something different from our usual vauxhalls & fords we decided to...

This thing is quick! Seems to corner pretty well for a FWD car. Live Stream, NASA 25 Hours of Thunderhill 2012 - 034Motorsport | Performance Parts for Audi, Porsche, and Volkswagen

Hello, B5, 1.8T Is it too risky to clean the turbo oil lines for 250.000mil- 14 year old turbo passat? There are no symptoms of turbo going bad but just in case, preventative maintenance. Have a slight sludge problem though. Alex

Just wondering if theres an easy way to get the clip off. Cant really see anything back there. My hose has a split in it, and im not ready to attempt to change out the entire flange just yet. Thanks for any and all info

I have a 99 1.8t AEB. I'm replacing the turbo due to failure. I think there's been work done on the oil feed line by the previous owner. He cut a section out and put a rubber hose on it. I don't know why. There's also a ton of sludgy oil where the fitting meets the engine. My questions is...

i am going to be lowering my 04 passat sedan 4motion and i dont know what to get. i am going to be running 18" rims and i want to get rid of the wheel gap and maybe tuck tire a little.If i tuck the tires am i going to rub. and when lowering am i going to have to get contol arms cause i really...

im making a custom oil feed line for a stock ko3, the orignial line looks to be the same diameter as 4an stainless braided line, but the hole in all the fittings i see seem to be a hair smaller than the hose diameter, im not sure that would be a big problem or not, but i dont want to chance...

I just got my APR stage I chip installed and had a small oil leak at my turbo. Now that i'm producing more boost, the leak gets worse.. I was wondering if anyone could get me a part number or something for a turbo oil feed line o ring so i can start there and see what's up with it.. Any other...

hi ,i want to fit fit reversing sensor to my 07 passat saloon ,can you tell me where is the best place to pick up the feed for reverse as i have noticed that the revering light are on the boot lid cheers

I need a good condition heater core feed hose for a 98' aeb 1.8t cant justify $90 for a hose. thanks!!

So I was in search of a new oil feed line as mine had a hole in the braided section. I wasn't really keen on buying a used one, or shelling out almost $200 for a new one. So, I made one from stuff I had in my garage. I also routed it in front of the engine instead of behind it (easier, and may...

I'm getting ready to replace my turbo, but discovered a few issues. I have a hole in the flex part of my oil feed line. I need a new one like yesterday! I looked on ebay and all I saw was used ones, and these...

I have a 98 AEB KO4 & was reading about a upgraded heat shield for turbo oil feed line? I noticed how close the CAT is to the bottom side of the oil feed line, especially the 90 degree angle where the line goes around the back of the engine. The line is bolted up correctly with the stock head...

I need a new airfilter for my 1.8t b5.5 I was looking in ECStunning and they have a few differnt brands: Mahle Meyle Mann VW OEM K&N I have heard to stear clear of K&N, but is there much difference between the others? I'm thinking of going with Mann. What do most of you guy use? does it even...

Quick question for the BT guys or anyone that might know, i need to order lines and i just wanna make sure i get it right the first time, on an AEB/ATW block the coolant feed line is a banjo fitting correct? i don't have time to actually look due to its location under the turbo and also my car...

I'm having a nightmare. Blown the turbo recently on my B5 1.9TDi. Got a new one on, cleaned everything out (intercooler and exhaust were full of oil, unsurprisingly!) and came to drive away, but spotted a small leak from the oil return pipe. Not a massive problem, I thought, but it seems I'm...

What have you heard about Audison/Hertz speakers and the company?My local stereo shop I deal with recommended them over the JL audio I was asking for and at a better price. I used to have MB Quart REF. Series before and they were great speaker. I just want something that has good sound quality...