Search Results for ‘f or s’

With my oldest now driving, I need to downsize my fleet. Unfortunately, that means my 99 Passat has to go. It'a a 1.8T w/ about 200k on the body, and about 160k on the motor (Bought the motor used with 150K on it). Did the timing belt, water pump, drive belts, etc etc when I did the belt. Also...

I cant paste the ad for some reason search 2004 tdi wagon UNDERPRICED!

thx

Selling my retrofit steering wheel L/R controls circuit board with harness *ONLY* already wired. Plug nd play for this steering wheel Fits B5/B5.5 MFSW with this retrofit steering wheel installed Everything works and Fully functional from radio to cruise control no lights. Again only selling...

Mirror Polished 1.8t AEB Intake Manifold DM if interested Asking $180 Plus S&H

Sold

Gents and Ladies, Passat got sold this past week :(:(:( so my overstock has to go to. Everything was purchased to fit 2004 Passat B5.5 AWM - 5 speed manual Priced OBO + Shipping or Local Pick up from Leesburg, VA. Part 1... New Bosch Purge Valve - 1C0906517A - $40.00 Ignition coil packs -...

Hey guys, I got in touch with my contact overseas and he imported the last of the covers from his VW dealership in his country, this option was available for the B5 Passats overseas but could be configured to work in our North American spec cars, This a great start to anybody who wants to...

I had this put away for few years and it won't fit my current model (4motion) so somebody come scoop this up, Not really trying to ship due to weight located in Brooklyn NY comes with hardware $60

OK I just swapped over to H&R Coilovers so my Koni FSD setup (2100-4044) is for sale, Total 4k on it and comes with a set of 4 H&R Sports springs (29795-1) & set of 2 ECS Front Coilover sleeves in case you wanna go lower in the front, This by far is the most comfortable sport suspension I have...

OK guys found my dream seats so these are on the market, There in pretty decent condition no major wear heat and power work, missing 1 power seat adjuster lever ( See pics). The seats are dark grey and was install in my 04 which came with the dark grey leatherette material and these seats...

I have an AWM Turbo head for sale I just pulled off a running engine. It had spun a rod bearing, destroying the crank and rod, but was still running without even a cel showing. $250 shipped or $200 picked up(13815 zip code,central NY State). I also have an AEB head with several bent valves. $150...

Hi All, We're putting our Passat wagon up for sale. It's got many new and upgraded parts and the car drives well. The drivetrain is solid, but we need something smaller with 4 wheel drive. We were the first owners. The good: Borg Warner k04-015 turbo put on at 164k miles Apkol upgraded side...

Brand new set of Avant Garde M621. Only mounted on the car to test fit. The only reason I'm selling is because I sold my car and bought a suv so I have no need for them. 5x112 19x9.5 ET35 all around Bullion gold finish. (I have both red and gold center caps) Brand new Dunlop Direzza...

I just removed a complete factory moonroof with motor from a 2003 GLX. Excellent condition! $100 complete, will not ship. Also have new OEM steel 15" wheels, never used, NEW condition, $30. each. Have several sets of leather door cards in excellent condition, light grey, and black. $25. per door...

Brand new never used still in the box. I have (2) of these. a/d/s a10s subs. 10" dia subs. These subs are all about sound quality vs SPL. Yes they can get loud, but they don't SLAM. If your into sound quality and are looking for that clean low tight bass, these are for you. There aren't very...

Kenwood car audio amps. All (4) of these amps I purchased brand new before year 2000. The KAC-823 amps were used in my car to power the whole system front and rear doors with no subs. I then added the KAC-927's. One of the KAC-927amps was used to drive all the tweeters, the second KAC-927 was...

I have 2 2002 Passat GLX, one sedan, one 4 Motion wagon. The 4 Motion just turned 200,000, the sedan has 157,477. I'll pull the heads before they goe to the crusher. Located in Norwich, NY 13815. $125 per head picked up. Willing to meet a reasonable distance. Both cars start and run, no bent valves.

Hey people I found in my parts bin my old Custom Eurodyne Stg1 ECU Passat V6 ATQ 30v engine. This was custom made by Eurodyne when I worked with PagParts/PPT, It gave me a very nice increased throttle response, Rear 02 sensors delete & Better MPG and increased RPM range $150 Shipped to any of...

-- Full Techtonics Stainless Exhaust w/ custom downpipe for GT2871r w/ vband application, includes spare wideband O2 bung for senors -- $500.00 + Shipping -- Neuspeed Short Throw Shifter manual -- $120.00 + shipping -- ATP Exhaust Manifold w/ block off plate for internally wastegated...