Volkswagen Passat Forum banner
cylinder
1-20 of 365 Results
Advanced
  1. B5 Garage
    I called the dealership for the socket size. He informed me it was a polydrive but couldnt recall if it was an M12 or M14. Haveing a hard time finding sets of polydrives too. Sent from my LM-V405 using Tapatalk
  2. Volkswagen Passat B5 Discussion
    I posted about this in the 'what did you do to your B5 today' thread but I wanted to post up pictures also. Back in 2013 when I swapped in a replacement engine, I changed out many old and worn out parts, the master cylinder reservoir was one of them. About a month ago I noticed a hairline crack...
  3. Volkswagen Passat B5 Discussion
    Weird part issue. I received my replacement passenger (and driver) lock mechanisms for my 1999. I went to install the passenger side, and tried to slide the lock cylinder back into place, and no go. I look in, and there is no slot for a lock cylinder connection. I verified the part# matched...
  4. Parts For Sale
    Anybody looking for good deal on a cylinder head? I have one that was rebuilt by Colorado Custom Cylinder Heads about a year ago and never used. Valve job, new seals and guides. It was off an AWM engine, so it has the small ports and VVT. Ready to bolt on, cams, tensioner and CPS are installed...
  5. B5 Garage
    The '99 1.8T has a misfire (no spark condition) on cylinder 3 - third one back from the timing belt cover. The #3 coil pack is good as the misfire doesn't move when this CP is tested on other cylinders. Guess I'll check the wiring to CP #3 before swapping the Ignition Control Unit. Though...
  6. New Member Introductions
    Hi There I have a 2012 passat 2.5 L and I'm having a strange problem. the airflow at the vents stops after 15-20 min I'm driving the car. It could be using AC or warming. It doesn't make difference. and the blower fan you can hear it is working fine and increases the speed, but just very...
  7. Volkswagen Passat B6 Discussion
    This is my first time ever posting and I’m probably a novice at best when it comes to this kind of thing so I’m sorry if this is in the wrong place . I have a 2011 cc sport with the 2.0t Engine. I had been getting engine codes for Engine too Lean at idle and decided to replace the pcv/oil...
  8. Volkswagen Passat CC Discussion
    This is my first time ever posting and I’m probably a novice at best when it comes to this kind of thing so I’m sorry if this is in the wrong place . I have a 2011 cc sport with the 2.0t Engine. I had been getting engine codes for Engine too Lean at idle and decided to replace the pcv/oil...
  9. B5 Garage
    This problem has been driving me crazy and I am hoping to get some opinions before I just start shotgunning parts. My 2001 Passat is having an issue where when going uphill from a stop, sometimes the friction point will begin much earlier in the travel of the pedal but the car won't actually...
  10. B5 Garage
    Hi I’m down a cylinder due to a spark plug failure. I’ve replaced the plugs and started the car but still down on the one cylinder. Swapped the coil packs around still that same cylinder not working. There is no codes on Vcds. So it’s not the plugs and it’s not the coil pack it seems there’s no...
  11. Volkswagen Passat B5 Discussion
    The ignition key in my 05 Passat was getting more and more difficult to turn. I took the key lock assembly out to troubleshoot the problem. Now I can't get the key tumbler assembly back in. The tumbler assembly has a slot that needs to align with a slot in the housing. The only way to get the...
  12. Volkswagen Passat B5 Discussion
    Tearing into a 2003 1.8t. P.O. had head completely redone after tb failure, screwed up timing and bent the new valves before the car ever ran, so after pulling the head noticed what seems to me like a lot of carbon buildup on the #1 cylinder wall. Is mostly at the top passenger side section of...
  13. B5 Garage
    So here is my saga: Decided to rebuild a 1.8T engine for my '02 Passat with 300k miles. The new engine runs but there is no oil getting to the top (cylinder head). It does drip oil from around the oil filter, like there is too much pressure there, but the CCT makes a lot of noise and there is...
  14. New Member Introductions
    Hi recently had car tuned up at repair shop the when starting a few days later CEL started flashing engine chugging. Turned it off restarted, ran fine then but code reader indicates misfire cylinder #3 possible cause for this?
  15. Volkswagen Passat B5 Discussion
    Hi guys. I had bent valves on my AWM 1.8T head, so had a local machine shop rebuild the head. The cost ended up being very close to the cost of a remanufactured head sold by Rock Auto. Looks like a decent deal at $1400, compared to the VW price of $2200. Looks like the Rock Auto offering has...
  16. Volkswagen Passat B6 Discussion
    Ok so I got the code when I started car, I hooked up my OBDII scanner via torque App, and got code P0304. to test each coil while engine is running I removed my air box and while running motor I unplugged each coil one at a time. The motor rpm dropped/stuttered from unplugging each one, thus...
  17. B5 Garage
    Hi... I have 2004 Passat V6, runs rough. CEL is on, code read is P0301. Inspected the spark plugs on passenger side and found oil in the spark plug 2 & 3 but spark plug 1 is dry and looks good. I found on the other threads in this forum the oil in the spark plug well will cause misfire. Is...
  18. Volkswagen Passat B5 Discussion
    I own a 2003 Passat 1.8t and my hydraulic tensioner failed whilst I was driving. The cylinder head needs to be replaced or repaired. I am having trouble with getting all the research together to do the job. I've been looking for weeks but still haven't got enough research. I know I am not gonna...
  19. Volkswagen Passat B5 Discussion
    2002 Passat V6 ATQ check engine light came on and I get the codes below. I won't be able to test things until this weekend but I hope you guys might give me some suggestions on where to start testing. The car runs fine at idle and high speed. Address 01: Engine Labels...
  20. WTB/WTT Section
    I'm looking for an ATW cylinder head for a 2000 B5 1.8T I'm in the process of repairing the car I just bought here on PW. I also need the outside lower weather strips that attach to the doors and run across the outside of the car to prevent rain/moisture from getting in the car. TIA
1-20 of 365 Results
Top