;) Positives: Your window won't suddenly fall into the door after the POS dowel breaks Your regulator clip won't snap (and window fall into door) Both handles still work The door will never permanently lock itself (without access) Upholstery door panel can be installed in 10 seconds to cover...

Custom turbo back mandrel bent B5 Passat exhaust for sale I am parting out my B5 Passat and planning to start with the exhaust. It is a custom built, 3” using aluminized steel and mandrel bends. Full turbo back, no cat. Two O2 sensor bungs in place. There is a tab welded for both manual and...

Hey All, I have a 2013 2.5L SE and I am in interested in adding a custom exhaust system, in hopes of adding a little more growl. Has anyone added a custom system? Did they/you use a prefabbed one from a Borla etc... (if thats even available) OR Did you/they custom piecemeal it via custom fit...

I'm entirely sick of the slop in my B5, that clunk drives me nuts. I dislike the stock bracket extra space, and wasn't entirely sure I wanted to use the 034 bracket and mount as it looks much smaller than the other available mounts. So I modified a stock bracket to fit a bigger mount! Need to...

Currently working on yet another suspension refresh and also changing out the front struts on a B5.5. I am so sick of those cheezy assed spring compressors, slipping around the coil causing the spring to bulge out one side and the fact that the acme threads are always getting messed up because...

Hi, guys the clear coat on the wifes car was getting pretty rugged looking in spots and something had to be done. while doing other work with the car incapacitated anyway, I stripped the clear coat (which took ages to do and not damage the aluminum) and repainted them gunmetal silver and...

Found this is my internet browsing, its an opensource ECU project. Maybe this can open some doors for us AEB people! (Provided you really know your stuff, unlike me) http://rusefi.com/ When I retire the B5, or maybe earlier, I know what I will be experimenting with until I completely destroy...

Hey everyone Does anybody near Allentown or Philadelphia do custom straight piping? I'm looking to get a setup for my 2004 1.8t that's not too expensive. If anyone out there does this or wants to just respond and give me a cost estimate. Thanks! Oh and I would want 2.5" piping from my test...

I finally bought a PES G2 kit off of a guy on eBay. I've been getting everything together for it beforehand so hopefully the install will be somewhat smoother ( yeah right ). I am sticking with the stock pulley for the time being because the engine is still stock. At this point I have a timing...

Hi everyone! Today we would like to talk about fog lights. Even though these lights are not as important as high or low beams, they still improve the visibility and driving comfort in the dark. Most of the vehicles today are equipped with stock fog lights, however a lot of base or lower trim...

Hello, W8 headlights that speak for themselves. They look brand new. I've also put brand new D2S bulbs in them. All Covers and tabs are in place. *any issues have been repaired or replaced PLUG AND PLAY! $600 shipped.

Hi Passat world, I just recently outfitted my 01 B5.5 passat with a new sound system with the amazing help for these fourms. Now one problem with my new sound system was the big bulky subwoofer box that I got rid of yesterday. I am now in the process of making a box that would fit the right side...

Ok so i bought my 99 B5 for $500 back in September and this car is a mess. The interior is all broken up (dash, seats, everything) so I was wondering if there were any custom interiors that someone had made or created or that can be transplanted from a different model car with near to zero...

Hi everybody this ECU was Custom built by PagPart & Eurodyne years ago, Application 2000 B5 Passat V6 4motion, I just found it in my parts closet and I'm really not gonna get back into the B5 scene, I had it done to eliminate the rear o2 sensors & it also has a slight bump in hp about 8-10hp...

This is our new place to keep posted about new custom PASSAT B6 WAGONS ...everybody is welcome here !

Hi all, just a follow up from my custom remap i had, i posted about a week ago asking if my car would be safe to drive without the proper software upgrade untill it was mapped properly..... Here are my mods Stage 1 generic map from 2 year's ago K04-015 turbo Audi 225 bam injectors Decat...

One of a kind production prototypes, lightly used in very good to excellent condition with all original stainless mounting hardware and nylon locknuts (I mounted using double-sided trim tape). Grippy and gorgeous. Included are dead pedal, clutch, brake and accelerator covers. CNC-machined...

Hey guys! I have a 2003 1.8T AWM FWD Automatic, and I'm planning on putting an exhaust on my car soon, and I'm having a few questions. My plan is to get a TT 2.5" downpipe, and then get a muffler shop to custom make a setup with a glasspack resonator, and a magnaflow muffler. I have been doing...

So apparently my parents don't want to store a large exhaust for over 5 years in their basement for a car that I don't have anymore :whistle: This is a one of a kind, custom "dual" exhaust for the FWD B5/B5.5. It is not a "true" dual exhaust as the 1.8T does not have two banks, it splits after...

We are glad to introduce custom Coverking® seat covers for Volkswagen Passat models at CARiD. Unlike other universal seat covers, these are tailored for your particular model and will fit like a glove. These covers will be a good solution if your seats start to wear out, you search for some...